Brake Fluid LIQUI MOLY DOT 4
A good brake system is a guarantee of the safety of passengers and the driver while the car is moving. For normal operation, a special fluid is needed. LIQUI MOLY DOT 4 meets all the requirements of manufacturers, is of high quality and reliability.
LIQUI MOLY is a German company that occupies a leading position in the global automotive market, has many positive and grateful reviews. Efficient and innovative lubricants produced by the company are certified and comply with all international standards.
Brake fluid Bremsenflussigkeit SL6 DOT 4
Liquid Moli Dot 4 based on glycol esters and boric acid esters. It is used in all brake drives with a hydraulic system and clutches, equipped with a motion stabilizer system, anti-lock braking system:
- ESP/DSK.
- CENTURY.
- ABS.
Has antioxidants, high boiling point in dry or wet state. The composition includes additives that protect parts from corrosion. Brake fluid protects against moisture, reduces evaporation and extends the life of system components.
<font><font>Materials</font></font>
LIQUI MOLY Bremsenflussigkeit DOT 4 is a low viscosity hydraulic brake and clutch product that extends service life, provides fast response, normal system bleeding, and also:
- Compatible with all brake fluids and mixes easily with them.
- Maintains resistance to oxidation throughout the entire period of use.
- It has high lubricating properties.
- It has a high boiling point when dry or wet.
- It has a high protection against steam locks.
- Works well with all rubber parts.
- Remains stable at low temperatures.
Technical specifications
| Color | yellow |
| Viscosity at -40°C | maximum 700mm²s |
| Viscosity at +100°C | maximum 1,5 mm²s |
| Density at +20°С | 1,06 g / cm³ |
| Dry boiling point | minimum 265˚С |
| Humidified boiling point | minimum 175˚С |
| PH value | 7,0 - 8,5 |
| Shelf life in original packaging: | 3 years |
Approvals, approvals and specifications
Meets the following ratings and specifications:
- SAEDJ1703/DJ1704;
- ISO 4925 class 6;
- FMVSS 116 ITEM 3 / ITEM 4.
Liqui Moly also recommends this product for vehicles requiring specification:
- Audi, Volkswagen, Seat and Skoda according to TL 766-Z bzw;
- VW 50114, BMW according to QV 34 001;
- GM Europe (Opel, Saab, Vauxhall) according to GMW 3356.
Application area
Suitable for all hydraulic brake and clutch systems that require its use. On vehicles with ABS, ASR, ESP/DSC.
IMPORTANT!
The equipment manufacturer's instructions must be strictly followed.
Application
Replacement must be carried out in accordance with the maintenance program, strictly following the manufacturer's instructions. It is compatible with all brake fluids, but the declared characteristics are realized only in unmixed (pure) form.
ATTENTION!
It is important to store only in tightly closed containers, as it is hygroscopic.
Release form and articles
Brake fluid Bremsenflussigkeit SL6 DOT 4
- article number 3086/0,5 l.
Brake fluid Bremsenflussigkeit DOT 4
LIQUI MOLY 8834 is a synthetic fluid containing inhibitors with anti-corrosion and antioxidant properties. Reduces vaporization, has a high boiling point. It can be used in hydraulic brakes, as well as in ABS safety and stabilization systems.
Completely replaces the Dot 3 class liquid. It has qualities an order of magnitude higher than those specified in the requirements:
- CRAFT NC 956-01.
- FMVSS 571.116 ITEM 4.
- SAE J1703.
- SAE J1704.
- ISO4925.
<font><font>Materials</font></font>
LIQUI MOLY 8832 is a low viscosity liquid. The composition includes organoboron compounds, glycol ethers, antioxidants. Protects mechanisms from corrosion. It has the following properties:
- Compatible with all brake fluids and mixes easily with them.
- It has a high boiling point.
- Remains stable at low temperatures.
- It has good lubricating properties for all parts of the brake drive.
- Reduces vaporization.
- Remains stable at high temperatures.
- Works well with all rubber parts.
- Does not change viscosity over a wide temperature range.
Technical specifications
| Boiling point | ISO 4925.6.1 standard | > 230°C |
| Boiling point of "wet" liquid (soda 3% water) | ISO 4925.6.1 standard | > 155°C |
| Kinematic viscosity at -40°C | ISO 4925.6.2 standard | |
| Kinematic viscosity at +100°С | ISO 4925.6.2 standard | ≥ 1,5 mm2/s |
| Density at 20 ° C | Standard asthma d941 | 1,02–1,07 g/ml |
| pH | ISO 4925.6.3 standard | 7 - 10,0 |
| Thermal stability ERBP-change | ISO 4925.6.4 standard | ≤3°C |
| Change in chemical stability of ERBP | ISO 4925.6.6 standard | ≤3°C |
| Evaporation at 100°C (losses) | ISO 4925.6.7 standard | |
| Evaporation at 100°C (residue) | ISO 4925.6.7 standard | without a trace |
| Evaporation at 100°C (residual pour point) | ISO 4925.6.7 standard | |
| Closed shelf life | 24 month | — |
Application area
Suitable for use in automotive shoe and drum brakes, clutches requiring synthetic fluid.
Application
Replacement must be carried out in accordance with the maintenance program, strictly following the manufacturer's instructions. It is compatible with all brake fluids and mixes easily with them.
