Anti-roll bar link: functions, service and price

Often little known to the general public, the anti-roll bar, also called the anti-roll bar, is part of the anti-roll bar system. suspension of your car... It is used to limit the vehicle swaying and leaning when cornering. The anti-roll bar link also keeps the vehicle parallel.

🚗 What is the anti-roll bar link used for?

La anti-roll barAlso called a suspension bar or anti-roll bar, it allows the connection between the anti-roll bar and the suspension arm or triangle.

Its role is to limit the rolling effect and vibration of the vehicle when cornering or on curved asphalt. In other words, the anti-roll bar link provides parallelismand the geometry of the car.

Its operation is simple: the anti-roll bar link ensures the connection between the anti-roll bar and the axle, thereby allowing the pressure to be applied to keep the wheels in contact with the road... Without this auto part, your car can roll over when cornering.

🔎 What are the symptoms of HS anti-roll bar connection?

Several symptoms can alert you to a malfunctioning anti-roll bar link:

• Mistreatment ;
• Loss of adhesion in turns;
• Clicking noise at the wheels;
• Vibrations in turns;
• Pulling machine one side ;
• To wear premature Tires ;
• Geometry problem or parallelism of the wheels.

If you experience any of its symptoms, quickly head to the garage to check the anti-roll bar links. In fact, your anti-roll bars can fail.

Note : An anti-roll bar problem can quickly lead to more costly damage to your vehicle's suspension and tires. So don't postpone having them checked by a professional mechanic.

🔧 How do I change the anti-roll bar link?

Replacing the anti-roll bar link is a complex operation that requires good mechanical knowledge and good tools. If you want to change the sway bar links yourself, here is a guide that lists all the steps you need to follow.

Required material:

• Protective glasses
• Protective gloves
• Complete set of tools
• socket
• Candle
• Thread blocking

Step 1: Jack up the car

Begin by placing your vehicle on jack supports using a jack. Make sure you position the vehicle correctly on a level surface to avoid any unpleasant surprises.

Step 2: remove the wheels

Once the vehicle is on the jack, you can remove the wheel bolts. It is also important to remove the wheel on the opposite side so that the anti-roll bar remains balanced during operation and is not defective.

Step 3: Remove the anti-roll bar link fasteners.

When the wheels are removed, you can begin to unscrew the upper and lower lock nuts with an open-end wrench. Use penetrating oil if necessary.

Step 4. Replace the faulty anti-roll bar link.

Now that the mounting bolts have been removed, you can slide the anti-roll bar links out of their place. If necessary, pry off with a screwdriver.

Step 5: Install a new anti-roll bar link.

Install the new anti-roll bar link into place, then tighten the upper and then the lower mounting nut. Remember to use a thread lock to secure the binding.

Step 6: check the wheel geometry

After replacing the anti-roll bar links, check the wheel geometry to make sure the links are adjusted correctly. This step is necessary to ensure good vehicle stability.

💰 How much does it cost to replace the anti-roll bar link?

On average, count from 40 to 70 euros change the rods of the anti-roll bar. However, the bill may increase if you also need to replace the anti-roll bar. Replacing the stabilizer link also requires checking the geometry and parallelism of the wheels, which must therefore be added to the invoice.

If you're looking to replace your anti-roll bar at a low cost, consider comparing the best garages near you on Vroomly! Indeed, you will receive all the quotes from the best mechanics to choose the cheapest or the best.