Windshield seal: function, service and price

Sealing the windshield is important to keep moisture inside, but it also helps secure the windshield to the inside of the case. Thus, the cabin will be sealed, which will ensure the comfort of the driver and other passengers. In this article, you will learn everything you need to know about a windshield gasket: how it works, symptoms of wear, how to replace a windshield with a gasket, and what is the price of a broken windshield gasket!

🚘 How does the windshield seal work?

The windshield seal is a seal, so the role of prevent moisture and rain from entering the passenger compartment your car. In addition, its role is to limit noise pollution inside the car, playing an insulating role.

Thus, it is located between the car interior and the glazed part of the windshield. The connection is usually built rubber be reliable.

Designed to be more and more resilient, they still wear parts that are exposed to harsh conditions: rain, snow, UV rays, wind, frost ...

If it shows signs of wear, it can be repaired with adhesive to extend its life. In case of replacement, you will need to choose gasket set to replace it completely and you will have to disassemble the windshield. On the other hand, you can also buy a cutout for your windshield gasket, specifying its exact dimensions.

⚠️ What are the symptoms of HS windshield seal?

To prolong the life of the windshield and to protect the interior, you need to pay attention to the slightest signs of wear on the windshield seal. This can manifest itself in several ways:

• The seal comes off : This means that the quality and effectiveness of the adhesive has deteriorated over time. In such a situation, it will be necessary to replace the seal and remove the remnants of glue from the passenger compartment and windshield;
• The seal remains at the level of the passenger compartment. : Since the windshield seal is sensitive to temperature fluctuations, it will behave this way in very cold weather. It is important not to shoot at it because it might tear it;
• The joint is hard : in severe frost, the rubber shrinks and can even take off from the support;
• The joint crumbles : after several hours of exposure to sunlight, the seal may crumble due to the excessive heat to which it is exposed;
• The joint expands : it can expand, especially during periods of extreme heat, when temperatures reach extreme values.

These various situations will affect the performance of the windshield seal and may interfere with your movements.

🛠️ How to change a windshield with a gasket?

If you would like to replace your windshield with a seal yourself, follow our step-by-step guide to make it simple and effective!

Required material:

Protective gloves

Toolbox

New windshield

New windshield seal

Step 1: Remove the worn seal.

Install yourself in the car and take a screwdriver. Use it to press down on the seal with the tip of a screwdriver. It must be placed between bodywork and a windshield seal. Always start at an angle so the seal can be easily removed.

Step 2: Remove the windshield

When the windshield is no longer held by the gasket, you can gently remove it.

Step 3: Install a new gasket

Pass a string through the new windshield seal to make it easier to install on your vehicle. Lubricate the seal, then install it on the vehicle.

Step 4. Install a new windshield.

This step requires two people to remove the windshield by pulling on the seal cord.

💸 How much does it cost to replace the windshield seal?

Windshield seal - inexpensive equipment, sold on average between 10 € and 15 €... If you replace it yourself, it will only cost you the cost of the part. However, if you go through a professional it will take approximately 50 € labor.

The windshield seal is an important element that holds the windshield in place and properly insulates the outside of the cab. As soon as signs of wear appear, intervene immediately until the windshield cracks due to insufficient maintenance of the seal!