Installation of pumping stations is a matter for professionals

The sewage pumping station consists of a pump and a hermetically equipped tank

(see www.standartpark-spb.ru/catalog/kanalizatsionnye-nasosnye-stantsii/).

The liquid from the sewer enters it by gravity, and then it is transported by a pump to a collection point for disposal or treatment. There are small sewage pumps that are connected to the toilet in the bathroom. They are equipped with a small tank, a cutting device and a pump.

The station tank is made of polymer reinforced material and is installed in such a way that its main part is underground, and only the neck of the tank remains on the surface. This is necessary for scheduled maintenance work. The mouth of the tank is closed with a metal or plastic cap.

SPS design

When drawing up a project, it is necessary to correctly arrange all the elements of the KNS. An incorrectly selected material or a certain element significantly reduces the operating time of the devices. The most important aspect is the correct selection of the pump, namely its power. When designing, it is necessary to take into account the nuances:

at what depth are the collectors located;
the likely need to raise the flow of sewage. In this case, a more powerful pump will be required;
density, volumes and type of effluents. It is also necessary to take into account the probable ingress of solid particles into the sewerage and equip the system with filters;
terrain conditions, geological and other parameters.

Design work is carried out by organizations that take into account the requirements of the legislation, sanitary services, and also comply with the technical conditions for the installation and operation of these installations. Exact observance of the necessary norms and rules makes it possible for a long-term and trouble-free operation of sewer stations with the timely implementation of measures to monitor performance.

Source — https://www.standartpark.ru/

16+

As advertising