Does driving technique affect the failure rate of a car?

Content

What will you learn from this post?
TL, д-
Bad overclocking technique
Improper use of the gear lever
Abrupt braking and stopping
Driving fast - dangers
Fuel condition

Car breakdowns are the curse of every driver. Most of them cannot be avoided - this is a natural result of using the vehicle. However, it is worth knowing that proper driving technique can reduce the risk of malfunctions. How does driving style affect his life? What behavior should be avoided while driving? Find out from our post.

What will you learn from this post?

What influences the failure rate of a car?

TL, д-

According to many experts, the cause of most malfunctions is improper operation of the car. Each driver has his own habits, which sometimes negatively affect the components of the car. You can break anything - from the clutch to the engine. Proper driving technique can minimize the frequency of breakdowns.

Bad overclocking technique

Acceleration according to sustainable driving rules will significantly reduce the risk of failure.... The driving speed must be adapted to the road conditions. If there is free space in front of you, add gas smoothly and vigorously. You need to feel the moment when pressing the pedal will not accelerate the car; Half the throttle is usually sufficient.

With dynamic acceleration, you make the most efficient use of engine power. You will also reach the expected speed faster and, as a result, a higher gear that supports optimal combustion (as you know, fuel consumption increases with a lower gear). Failure to do so can result in damage to the drive unit and high replacement costs.

Improper use of the gear lever

Shifting too hard and holding the lever hard is an easy way to damage the transmission and mass flywheel. You have to be careful with the clutch and leave aggressive shifting up to the riders. Also remember that you can not keep your hand on the handle - constant pressure causes wear on the synchronizers and switches.

Abrupt braking and stopping

Frequent harsh braking will heat the pads and discs to high temperatures. If you stop for a moment after many such maneuvers, you can burn them. For prevention, drive a few hundred meters - the parts will cool down, and you can safely park.

So-called engine braking is recommended for every driver. It consists in releasing the gas pedal without pressing the clutch. This leads to an even use of car parts and, as a result, to an increase in their service life. This good habit is worth using, especially when traveling in mountainous areas, as well as when driving with a large load or trailer.

Driving fast - dangers

It takes a few moments for the engine to reach its optimum operating temperature. If you accelerate to high speed immediately after takeoff, the piston skirt will soon jam and the power unit will become louder.

Pay attention to the bumps in the road. Dynamic driving in a deep puddle will certainly not have a positive effect on the car's electrical equipment. In the worst case, the engine will suck in moisture, which will lead to its complete destruction and the need to replace it.

Fuel condition

Try not to run into the reserve. Deposits accumulate in the tanks of most vehicles and often enter the injection system when there is not enough fuel. In gasoline engines, this usually leads to failure of the pump, and in diesel engines, to failure of the injectors.

Does driving technique affect the vehicle bounce rate?

Road safety is not only a matter of following the rules, but also the correct operation of the vehicle. Knowing about bad habits and eliminating them will avoid serious breakdowns and frequent visits to the service. It's never too late to learn, so try to become an even better driver - train regularly and use your car wisely. If you are planning to repair or replace components, see the avtotachki.com offer - here you will find a wide selection of spare parts and useful car accessories.