Inside and outside ›Street Moto Piece
Your motorcycle helmet is an indispensable item when you hit the road! It is important that it be in perfect condition, that there is good visibility and that it feels comfortable in it, so it needs to be taken care of! The helmet gets dirty quickly due to insects, pollution, weather, so regular cleaning becomes essential.
Here are the steps to maintain a motorcycle helmet with the right actions and the right products to extend the life of your helmet.
Clean the outside of the helmet
The most important thing when cleaning the outside of a helmet is to be careful not to damage it, scratch it or compromise its quality. Do not use glass products or any thinners or solvents, as this will leave marks on the helmet.... You must use special helmet cleaner without alcohol, as this can lead to tarnishing of the paint, as well as its varnish. This purifier suggested by motul contains the formula insect resistant, neutral and non-corrosive, which allows proper care of the helmet without damaging the surface.
- Run a stream of hot water over the helmet and rub with your hand to remove as much dirt as possible.
- Spray cleaning spray on the helmet and visor and wipe down with a sponge (do not use the scratching or abrasive side of the sponge). Thus the result will be perfect without risk to paint or varnish.
- For corners such as seams, ridges, and vents, use a soft toothbrush to effectively clean and remove dirt.
- Dry the helmet with a soft or microfiber cloth.
If there are superficial scratches on your helmet, they can be erased Motul Scratch Remover.
Clean the inside of the helmet
- Separate the foam as much as possible which are removable, it is very important to wash them because they are exposed to dirt as well as sweat, which makes them a nest for bacteria.
- Pass them to a basin of warm soapy water and rub.
- Remove excess water from the foam.
- Spray foam on the removed part as well as the inside of the helmet with its foam using special spray for internal cleaning of the helmet, this will allowdisinfect, disinfect and deodorize by deeply destroying all bacteria.
- Allow the foams to air dry. Be careful never to put in the dryer.
- The last step: put the foam back in place and your helmet will Like New !
As you can see, cleaning a motorcycle helmet is child's play! Remember to do this regularly for hygiene and comfort reasons. Plus, taking care of your helmet will extend its lifespan and therefore save you money in the long run!
Our experts recommend:
