Choosing a stand for a motorcycle workshop

If you want to save money and do your own bike work, you need to balance the bike. Therefore, it becomes necessary to use a crutch. The sidestand and centerstand, usually built in by the manufacturer, are not sufficient to secure and balance the motorcycle. To do this, you need a motorcycle workshop stand. 

What is a motorcycle workshop stand for? How it works? What kind of motorcycle workshop stands are there? How to make the best choice? All tips for choosing the right stand for your motorcycle workshop can be found in this article. 

What is a motorcycle workshop stand for?

Motorcycle workshop crutches are crutches commonly used by professional mechanics to keep motorcycles stable. They are supports to keep the motorcycle in balance when performing some work on it. 

Using a motorcycle workshop stand is useful for self-lubricating or re-tensioning the chain without the help of a professional. It is also useful for removing the rear wheel or changing wheels on a motorcycle. Likewise, the use of a workshop stand is essential for cleaning brake pads and general maintenance of the motorcycle. If your motorcycle does not have a center stand, a workshop stand becomes necessary to lock and secure your motorcycle. Even today, manufacturers no longer provide center stands for motorcycles. Therefore, you will have to buy them to play the role of a car mechanic. 

How is the motorcycle workshop stand arranged?

Motorcycle workshop stands lift motorcycle wheels using stable parts. You need to be very careful to install the workshop crutch, although it has a lever to make it easier for you. Failure to observe the precautions and vigilance can cause the motorcycle to fall very quickly. This exercise also requires a lot of strength. Therefore, it is recommended that a second person be called in to help you set up the motorcycle at the workshop stand. 

In addition, we recommend placing the pads and forks in the correct positions for easier handling. Likewise, by holding the motorcycle upright, gripping the saddle, pushing down on the stand arm, you can use the workshop stand without any restrictions. 

Running a motorcycle workshop stand is not that difficult. With a little vigilance and attention, you can stall the motorcycle and keep it balanced. 

What kind of crutches are there?

There are several types of crutches. In this article, we will list the most common and effective ways to keep your motorcycle in balance. 

Side crutches

They are usually used to keep the motorcycle upright... This crutch is very effective if you want to tackle the mechanics of light. Ideal for everyday use. However, it has certain disadvantages. After all, this crutch is present on two wheels, so it is difficult to carry out work on a motorcycle. In addition, during operation, the motorcycle takes up a lot of space in the garage. It also prevents you from properly maintaining your motorcycle. 

Central crutches

Center crutches are often built into machines. But many manufacturers no longer integrate it to save weight. This kickstand is very powerful and very effective for balanced motorcycle parking and saving garage space. When you use this car parking stand, the weight of the machine is borne by the entire center stand and not only on two wheels. Thanks to the central stand, you can carry out several types of work on your machine and clean it properly. 

Front crutches

The front struts are those that rest on the base of the motorcycle's fork on one side and those that are located in the steering column. 

When it comes to the stand that sits under the base of the plug, you won't have a problem with it. This type of stand is also suitable for several types of motorcycles, if not all. They are designed to remove the front wheel. 

As for the crutches, which are inserted into the steering column, their handling requires great delicacy. Intended for disassembling the fork, it is recommended to be careful when installing it, as there is a risk of damage to the splash guard. 

Rear stand

Unlike other crutches, The rear step is not compatible with all motorcycles, especially the gearbox.... There are sliding crutches and fork crutches. 

The skate stand must be correctly positioned to be balanced. Its stability depends on the fulcrum. If positioned too far forward, the motorcycle may fall. If installed too far back, the wheel can be difficult to remove. 

As for the fork stand, it is very stable, but devils must be attached to the swingarm to use the bike. Very often, manufacturing houses provide for the installation of a diabolo on a motorcycle swingarm. 

How to make the best choice?

With such a variety of motorcycle workshop stands, choosing one of them can be very difficult. To make your choice, you need to analyze the characteristics of each type of crutch and choose the one that best suits your needs. Your choice will also depend on how you plan to use the crutch. Will it be used to secure the motorcycle for cleaning? For small mechanical work? Or for tasks that require a lot of time and energy? 

Moreover, your selection should also be made according to your budget. Prices vary depending on the type of crutch, workmanship and materials used.