Oil channels clogged - look at the danger!
Machine operation

Oil channels clogged - look at the danger!

Let's not beat around the bush - clogged oil channels in the engine due to the negligence of the driver. If you forgot to change the filter in time and did not pay attention to the specification of the engine oil, do not delay the diagnosis. Deposits on the walls of the channels can block the flow of oil and even lead to engine seizure. How to protect the wires from blocking and what to do if a problem occurs? Let's go with advice!

Shortly speaking

The clogging of oil channels is affected by many negligence. Most often, the cause is too long replacement intervals for the fuel or oil filter, as well as in small portions or poor-quality lubricant. When the oil does not reach all the nooks and crannies of the engine, the friction between the interacting parts increases and the energy is converted into heat. This is accompanied by an expansion of the individual elements and an increase in pressure, which displaces the residual oil. When lubrication does not protect the channels from contamination, they become clogged and cause engine failure - in extreme cases, the connecting rod is forced through the engine wall or the drive is blocked.

Check the danger of insufficient oil passages

Without clean oil passages, the lubricant will not get into the places in the engine that it is designed to protect. The absence of an oil film between individual parts, such as the piston ring and cylinder wall, leads to increased friction. The energy it generates it turns into heat and increases the temperature of the motorcycle... Delayed oil delivery or reduced portions are already causing these areas to become so hot that the next dose will not soften the chafing. Simultaneously heating is accompanied by the expansion of adjacent elements and an increase in pressurewhich completely displaces the lubricant layer. Therefore, the oil no longer protects the oil channels from clogging with impurities and does not cool them properly. As a result, the engine speeds up, and in extreme cases, completely jams, even when the nozzles are not completely clogged.

Other possible scenarios? Clogged oil channels can contribute to:

  • deformation of rubbing surfaces,
  • engine knocking
  • smoke from the exhaust pipe after starting the car,
  • punching a hole in the engine block and pushing a connecting rod through it,
  • cracked piston heads,
  • melting in a compact crankcasewhich will completely prevent the launch,
  • wear on the camshaft and its bearings, so that they will not fulfill their task of controlling the timing of the opening and closing of the engine valves, so the car may go out.

Oil channels clogged - look at the danger!

What causes clogged oil passages?

Incorrect engine oil

Why are the oil channels clogged? Several factors contribute to this. First of all, the use of low-quality engine oil, its impurities, overly fluid formula and late replacement... To ensure that this product is suitable for your vehicle, check the vehicle manufacturer's recommended parameters and compare with the specification on the label.

Another disadvantage of patency of oil passages is the replacement of used oil with a product with a less viscous formula - paradoxically, instead of flushing, it can cause contamination of the oil passages.

Infrequent replacement of fuel and oil filters

Excessively long drain intervals are a problem that affects both the fuel filter and engine oil. First it loses its properties after about 17 kilometers and it doesn't do a good job of trapping contaminants in the lubricant. And if you have a car with a gas plant and you mainly drive around the city, you need to change it every 10 kilometers. Admittedly, diesel engines emit a lot of soot, so it is not surprising that even after several tens of thousands of kilometers, the oil loses its amber color. It should not be assumed that the soot that enters the crankcase will be endlessly entrained and bound by oil. Its absorption capacity has its limits. when they run out, deposits form on the lubricated engine parts.... As a result, the channels lose their bandwidth.

What time or distance should I change the engine oil? Already depends on your driving style.

  • From time to time, the engine starts, mainly when driving slowly away from traffic jams - once every 20 kilometers.
  • Slightly more intensive operation - every 15 km.
  • Difficult conditions, such as high levels of dust in the city, constant engine operation, short trips - no later than every 10 kilometers.

Irresponsible mechanic

While it may seem that no one will take better care of our car than a mechanic, it happens that he will also harm the car. It is enough that after replacing the turbine or head gasket does not wash away metal chips and dirt from the engine system with a special agentand the engine jams. That is why it is always worth using the services of a proven, proven workshop.

Oil channels clogged - look at the danger!

How to protect the engine from the consequences of clogged oil channels?

By keeping a close eye on the performance of a car, you have a chance to notice a drop in performance in time, and the same thing happens. progressive engine friction and clogged oil passages... If you take the car to a mechanic as soon as possible, you will probably pay less for the repair and save the engine. Power drop and temperature rise these are the first symptoms that should concern you. If you also notice smoke from the tailpipe, this is the last moment to avoid breaking the powertrain. When there are cracks in the head, pistons, connecting rods or the wall of the motorcycle, it will be too late to save.

The traditional way to change the lubricant is to drain it through a special plug in the oil pan or using a special suction pump. However, contaminants that continue to threaten the engine cannot be completely removed in this way. Waste oil, because due to the design of the engine, it still has from 0,4 to 0,7 liters. Therefore, it is worthwhile to carry out the correct rinsing in the workshop with the appropriate preparation, carried out using a device with a pneumatic system... This method allows you to dissolve any dirt, thoroughly wash metal filings, increase the efficiency of the motor and extend its service life.

Still looking for the perfect engine oil for your car? Avtotachki.com offers a wide range of lubricants at affordable prices. Come to us and see for yourself!

Also check:

5 symptoms of turbocharger breakdown

The glow plug is flashing - what does it signal and is it a concern?

How do you choose a good mechanic?

,

Add a comment