Replacing the ESP control unit VW Polo Sedan
Content
In order to replace the window regulator control unit on Volkswagen Polo Sedan cars, it will be necessary to remove the front left door trim, and only then can this unit be dismantled.
The progress of the removal and installation of the VW Polo Sedan power window control unit
So, below will be considered the procedure for performing the necessary actions during the repair:
- Remove the front left door trim
- On the inside of the casing, we find the connector with the power wires and disconnect it from the ESP unit
- Using a flat screwdriver, press the block retainer and remove it from the casing
- Replacing with a new unit is carried out in the reverse order.
The price of a new block is from 8000 rubles. for the original, but during disassembly you can buy a used one in excellent condition from 1500 r. and higher.
Replacement video review
VW Polo Sedan - Replacing the power window control unit
After installing the unit, we connect the connector, install the door trim in its place. At this, the repair can be considered complete. Thank you for the attention.
