Replacing the carburetor with your own hands on 2107
The need to replace the carburetor with a VAZ 2107 rather rarely arises, but nevertheless, if you need instructions for performing this type of repair, below I will tell you in more detail about the progress of the work. So, first of all, all the necessary tools should be at hand, namely:
- Open-end wrench 13
- Head for 8 and 10
- Ratchet handle
- crosshead screwdriver
First of all, we need to remove the air filter along with the case. To do this, unscrew the upper cover fastening nuts. Then, with a head of 8, unscrew 4 nuts for securing the case, as shown in the picture below:
Then we remove the body and get access to the carburetor, having previously disconnected the hoses and pipes:
Now we take a Phillips screwdriver and use it to unscrew the bolts of the clamps that clamp the fuel hoses:
This also applies to the thin hose that comes from the distributor:
Next, we take off the plug from the valve, which is clearly shown in the photo below:
We also disconnect the damper drive rod:
Also a spring that fixes the flap:
Now we take a key for 13, it is very convenient to use a ratchet wrench, and unscrew the 4 nuts securing the VAZ 2107 carburetor to the intake manifold housing:
After that, you can easily remove the carburetor by simply gently lifting it up with your hands:
As you can see, the replacement process is pretty simple and doesn't take a lot of time. Installation of the carburetor is also simple, and it is carried out in the reverse order. If you decide to change a part, then its replacement can cost you from 2500 to 4000 rubles, depending on the model and manufacturer.