Hinge cap replacement - why is it so important? How to do it yourself? How much does a mechanic cost?

It is difficult to unequivocally answer the question of how to replace the hinge cover. This is mainly due to the fact that this part is an extremely important element of the entire drive axle system. If he refuses to obey, it will be impossible to change the angle of the axle shaft and ensure a uniform transmission of the drive. Replacing the hinge cover without disassembling some components simply will not work. 

Accordingly, if you have no idea about the mechanics, leave this task to a specialist.. Without the help of a specialist, it is only possible to replace the outer hinge cover in the car. Finding the inside is very difficult and therefore requires a lot of mechanical knowledge. Find out how to replace the hinge cover!

Replacing the wrist guard - why should it be done regularly?

Replacing the joint cover, contrary to what it seems, is a really important job. This element is extremely sensitive to corrosion and therefore requires appropriate protection.. Structurally, it is enclosed in a special rubber casing filled with grease. If it is damaged, various contaminants will get inside. This, in turn, will lead to extremely costly breakdowns. If you're wondering how to replace your wrist guard, read on.

How to replace the joint cover yourself?

Assessing how and when to replace wrist guards is tricky. First of all, you should regularly check the condition of this element so that there are no more serious breakdowns. Replacing the hinge cover is an operation that cannot be performed without disassembling the driveshaft from the vehicle. Therefore, certain steps will need to be taken. which the? See for yourself how to replace the hinge cover!

How to replace the hinge cover step by step?

Here's a step-by-step guide to replacing your wrist guard. Follow her and the process will go smoothly.

1. Loosen the bolt in the center of the wheel with a socket wrench.
2. Turn the wheels as far as possible in the direction from which you are replacing the element.
3. Jack up the car and remove the wheel.
4. Unscrew the screw from the beginning and push the one with the hinge so that it comes out.
5. Pull the hinge out of the hub.
6. Install the screw from the first step.
7. Remove the connection with the damaged cover.
8. Clean the axle shaft and joint with a suitable product.
9. Put on a small coupler and a cover on a half shaft.
10. Lubricate the joint with the product you received with the cap.
11. Slide the washer and bushing onto the axle shaft.
12. Press the remaining grease into the cap mounted on the axle shaft.
13. Put a large tie on the lid.
14. Install the hinge half way.
15. Place the rubber boot on your wrist and tighten the clips on it.
16. Assemble the remaining components and the hinge cover replacement is complete.

What is the cost of replacing the joint cover?

If you decide to replace the wrist yourself, you can save some money on labor. The item itself costs a few zlotys. Remember, however, that such products will not do their job very well. In case of replacing the joint cover, the price of the element must be at least 40-5 euros, which means its best quality. 

How much does it cost to replace a hinge cap at a mechanic? As you already know, this process is quite time-consuming. That is why many people decide to have a specialist perform it. The cost of such a service in the workshop starts from 5 euros In the case of more complex cars, it can reach up to 15 euros.

Wrist guard replacement is one of many maintenance tasks. However, the truth is that most people remember changing filters or fluids. In turn, care for the joint coating is no less important. Don't wait until the last minute and your car will serve you for many years to come.