Replacing the Nissan Qashqai number plate lamp

Probably, all motorists during their ownership of a particular car often face the problem of burnt out lamps.

 

Sometimes it is enough to visit a car service to change the lamp, sometimes it is very difficult to change a light bulb in modern cars, you have to disassemble the floor of the car. But in some cases there is no need to visit the service, the replacement operations are quite simple, and anyone who has ever held a screwdriver in their hands can handle them. By doing this, you will save a lot of time.

In this article, we will consider the operation to replace the license plate light on a 2006-2013 NISSAN QASHQAI car. I apologize in advance for the quality of the photo, but I think everything is clear.

First of all, we take a screwdriver (so as not to inadvertently scratch the paint, you can wrap it with tape) or a suitable plastic spatula. Who is confident in his abilities can not wrap himself with electrical tape))). We hook the RIGHT edge of the roof and pull a little to the left and down, after the right edge has been unhooked, remove the screwdriver and manually remove the left edge of the latch.

Everything, the ceiling is in our hands, now we take the cartridge, turn it counterclockwise and pull it out of the ceiling.

Uses a conventional 5W baseless lamp. We just pull it towards ourselves and take it out, replace it with a new one and assemble everything in the reverse order.

The left and right ceiling lamps are removed in the same way, that is, we begin to shoot from the right side.

You can replace the lamp with an LED one, then you will forget to replace these lamps for a long time, just keep in mind that the LED lamp has a polarity, so if it does not light up when you turn on the dimensions, you just need to remove the lamp from the socket and insert the other side.

That's all. Good luck on the roads!