Instructions for replacing the pump (water pump) VAZ 2107
Uncategorized

Instructions for replacing the pump (water pump) VAZ 2107

The water pump of a VAZ 2107 car is a fairly reliable piece, but sometimes it can also malfunction. It usually wears out prematurely if the alternator belt is overtightened. That is, the bearing breaks down and the operating efficiency drops sharply. This can lead to overheating of the engine, so it is not worth delaying the replacement.

The guide below will show an example of replacement along with the case, although this is not necessary in ordinary cases.

Tool required for work

  • Big and small ratchet
  • Extension
  • Socket heads for 10 and 13
  • Open-end wrench 13
  • Flat screwdriver

a tool for replacing a pump on a VAZ 2107

Pump replacement procedure

Of course, before proceeding with this repair, we need to complete some preparatory points, namely:

  1. Drain coolant (antifreeze or antifreeze) from the system
  2. Remove alternator belt

We take a screwdriver and loosen the hose clamp that fits the pump. More clearly shown in the photo below:

clamp for attaching the hose to the pump on the VAZ 2107

After that, you can remove the pipe by applying a certain effort. the result is shown in the photo below:

remove the branch pipe from the VAZ 2107 pump

 

Next, you need to unscrew and remove the thin tube for supplying coolant. Keep in mind that the tube is very “delicate” and must be handled very carefully so as not to break. It is best to use a ratchet handle with a 10 mm head. Take a look below:

how to unscrew the tube leading to the pump on the VAZ 2107

Now it is worth taking the pipe aside carefully and effortlessly:

disconnecting the coolant supply pipe to the pump on the VAZ 2107

The pancake bolt of the VAZ 2107 pump body is located on top and we need to unscrew it first:

unscrew the bolt securing the pump to the block on the VAZ 2107

Then try to remove it from the holes. This is not always easy to do, but you can spray it with a penetrating lubricant to make your job easier:

IMG_2648

It remains to unscrew the two bolts securing the water pump from below. They are located in such a way that it is best to use an open-end wrench:

IMG_2649

At this stage, almost everything is ready and now you can carefully remove the pump from the car along with its body. Note again that in most cases you have to remove the water pump separately, so this repair can be easier and faster several times over.

instructions for replacing the pump with a VAZ 2107

Below is the final result when the complete assembly is removed from the vehicle:

replacing the pump with a VAZ 2107

Installation is carried out in reverse order. The price of a new pump for a VAZ 2107 is approximately 700-1000 rubles. The cost depends on the manufacturer. Do not forget that it is highly desirable to make and replace all gaskets that were broken during this repair.

Add a comment