Replacement of stabilizer bars Kia Cerato

Consider the process of replacing the stabilizer struts on the Kia cerate. There is nothing complicated in this repair, the main thing is to prepare the necessary tool and know some of the nuances - we will describe all this in this material.

Tool

• head 17;
• key on 17;
• WD-40;
• jack.

Replacement Algorithm

We unscrew, hang up and remove the desired front wheel. You can see the location of the stabilizer bar in the photo below.

Advice! Clean the threads from dirt and treat WD-40 several times in advance, since the nut will sour over time and it will be difficult to unscrew it.

We unscrew the upper and lower nuts by 17, while, if the finger itself began to turn together with the nut, then with a 17 key it is necessary to hold it. The photo shows how it should look.

Further, if the rack does not come out of the holes easily, then you need to either raise the lower arm with a second jack (to loosen the stabilizer tension), or put a block under the lower arm and lower the main jack to again loosen the suspension. There is another option, you can bend the stabilizer itself with a small mounting and pull out the stabilizer post, similarly bending it, put a new post and screw it on.

Read how to replace the stabilizer bar on a VAZ 2108-99 separate review.