Replacing the rear brake cylinder on Grant
Articles

Replacing the rear brake cylinder on Grant

The rear brake cylinders on a Lada Grant car have to be changed extremely rarely and this is done in the following cases:

  1. The appearance of a leak from under the rubber bands of the pistons of the cylinders
  2. Seizure of cylinders in one position

To carry out this repair, the following tools are required:

  • head for 7 and 10 mm
  • rattle or collar
  • split wrench for brake pipes
  • penetrating lubricant

rear brake cylinder replacement tool on Grant

Do-it-yourself procedure for replacing rear brake cylinders on Grant

So, the first step is to remove the rear brake drum, which is shown well in of this manual.

After that, it is necessary to loosen the brake pipe fastening nut from the inside, as shown in the photo below.

unscrew the brake pipe on the Grant from the rear cylinder

Then we unscrew the two cylinder mounting bolts from the outside, which is clearly shown below.

unscrew the rear brake cylinder mounts on the Grant

Now we finally turn off the brake pipe.

unscrew the brake pipe on Grant

From the inside, take out the brake cylinder, spreading the pads slightly on the sides.

replacement of the rear brake cylinder on Grant

Installing a new one takes place in reverse order. Replacement is done in the same way, both on one side and on the other. A new brake cylinder for the rear wheel on Grant can be purchased at a price of 200 rubles apiece. After performing this repair, it will be necessary to bleed the brake system in order to expel all the air from the pipes.