Rearview mirror: role, change and price

The rearview mirror contributes to your road safety by reflecting what is happening behind your vehicle. Therefore, it is necessary to replace the rearview mirror if it is broken. If the shell is intact, you can replace the mirror only after making sure it is compatible with your mirror.

🚘 How does a rearview mirror work?

There are three in your car wing mirror A: two outside each side of the car and an inside rearview mirror. Their role is to see what is happening behind the car and on the sides in order to limit blind spots and the ride is safe.

These mirrors are composed of two elements: Coke, And зеркало what is there. It is thanks to him that you want to see what is happening behind your car. This is a mirror adjustablemanually or electrically. Usually this is a flat mirror, but some mirrors are panoramic: in this case, the mirror is convex, which increases its field of view.

On modern cars, the rear-view mirrors are more complex and have, for example, a heating function. defrost... They can also switch to day or night mode to avoid reflections from other vehicles' headlights in a way that could blind the driver.

Thus, the role of the rear-view mirror is a matter of safety. For this reason, it is very important to quickly replace a broken, cracked, or peeling mirror. You risk getting fined if you drive with an HS mirror.

🔧 How to change the rearview mirror?

For road safety reasons, it is important to replace a damaged mirror. But if the shell is intact, you can replace only the mirror mirror. However, make sure that the adjustment system is still working and that your new mirror is compatible with your mirror.

Material:

• New mirror mirror
• screwdriver
• Window cleaner

Step 1: Remove the old mirror from the rearview mirror.

After making sure the new mirror is compatible with the mirror, remove the old glass. To do this, use a screwdriver to pry the mirror and remove it from the case. Depending on the window locking system, a different action may be required, for example if a tongue is present.

Step 2: Connect electrical connectors

If your mirror heats up, you must disconnect its electrical connectors: usually two electrical wires. Be careful, because here again everything depends on your rearview mirror: for example, there may be more of them if it is equipped with flashing repeaters. Then plug in the connectors of the new mirror.

Step 3: Install a new rearview mirror

Before installing a new mirror, clear the ice spot. Apply sealant, then glue the new glass so that it does not touch the edge of the mirror. Finally, test it into place by tapping lightly on the edge of the mirror.

👨‍🔧 How to re-glue the rearview mirror?

Sometimes the rearview mirror will come off or shift when its glue starts to age or after an impact. you can buy sealant in the form of a gel or spray in the auto center, but it is also possible to re-glue the rearview mirror tosilicone glue or just in strong glue.

📍 Where to buy a rearview mirror?

You can buy a new mirror mirror in the auto center, in Feu Vert, Norauto and Midas. You will also find it in your garage or dealer. Finally, auto parts stores naturally sell rearview mirrors.

Before buying a new mirror, make sure that it is compatible with your mirror: by size, defrosting or not, etc. Calculate the price depending on the type of mirror From 10 to 20 € for a standard ice cream and about 50 € for heated rear view mirror.

That's all, you know everything about the rear-view mirror! As you may have guessed, this ice cream is easy to change on your own or put on again if it wiggles. However, if the mirror body is also damaged, you will need to have the entire mirror replaced by your mechanic.