Wintering for a motorcycle: instruction manual

In the season, as soon as the first frosts and flakes come, wintering the motorcycle then is a priority for many. This is a really important step for maintenance of your motorcycletherefore it should not be neglected. Today, let's go over the highlights together to provide you with all the information you need.

Emptying.

Before storing your motorcycle in a warm garage, take the opportunity first to vidanger... Ideally, the bike is still a little warm to get the job done. First, protect the floor with an environmental mat to prevent engine oil stains, then remove the filler screw. Be careful to let the oil drain into the drain pan as it can be very hot! Then detach oil filter, then apply oil to a new filter on the seal. Then follow the manufacturer's instructions to screw the new part to the motorcycle. You just need to tighten the drain screw and add new oil. Make sure the oil level is correct and you just need to clean it up! Feel free to refer to the service manual at any time. The latter is really full of good advice, moreover adapted to the model of your two-wheeled bike.

Motorcycle cleaning.

Even if your hands are dirty due to emptying, you can go winter cleaning. This step is important for keeping your motorcycle well, so be careful with your beautiful one. Don't neglect small nooks and crannies that can get dirty quickly, especially around wheels, engine, headlights ... The waterproofing and sponge method has been proven over the years, add some elbow grease and voila! To thoroughly clean any bumps from insects or other small debris, arm yourself with special brushes to avoid damaging the motorcycle (among other things, the risk of scratching). There are also motorcycle cleaners for cleaning rims or saddles, your motorcycle will be grateful. Finish cleaning by rinsing abundantly with water and remember to buff, lubricate and lubricate the motorcycle.

Disassembly and maintenance of batteries.

Once your motorcycle has been pampered, it's time to take stock battery... In fact, it also needs maintenance to increase its durability. So you can take it apart, check the acid level, and finally connect it to the motorcycle battery charger. Remember to work in a dry environment and away from excessively cold seasonal temperatures.

Tire pressure and weight reduction.

During winter, immobilization of the motorcycle can cause deflation of the motorcycle tires. To anticipate this pressure loss and avoid re-passing through the inflation station as soon as you resume work, consider inflating your tires a little. Also, to reduce the stress on the tires, don't be afraid to place the two-wheeled motorcycle on a stand. There are different models: front, back or center.

Motorcycle protection.

During this rest period, you can cover your vehicle with a motorcycle protective cover. This is required if he stays outside, and optionally if you leave him in the garage. However, this will still protect it from dust, moisture, or possible projectiles. Don't forget to choose a cover that is adapted to the size of your motorcycle for optimal protection while allowing it to breathe!

So, here are some tips to help you succeed in your Wintering motorcycle in all its simplicity and efficiency!

Also find all our Tests and tips.