The 5 Best Pullers for Reverse Hammer Bearings: Choosing the Right One

A specialized tool made of stainless steel is capable of pressing bearings with an internal diameter of 15 to 32 mm from the housings. The puller is attached to the reverse hammer by means of a threaded connection. The displacement of the center of gravity of the sliding weight towards the thrust washer, which protects the fingers on the handle, increases the impact force during dismantling.

Works related to the repair and replacement of rotating parts in machinery make it necessary to buy a reverse hammer to remove bearings at an adequate price. Help in choosing will provide an overview of some models in the current sale.

Reverse hammer for internal and external bearings "MASTAK" 100-31005C

Pullers made of high quality tool steel. The fingers of the collet clamps are cast, structurally made in the form of adjustable hook units, with which it is convenient to both remove the bearings from the axles and press them out of the crankcase. The stroke stopper of the impact weight is spindle-shaped and forms a single cast unit with the guide. The sliding weight is all-metal, with a relief groove for a comfortable grip with the palm of your hand. The handle is made in the form of a pin passing through a hole in the end part of the bearing pin.

"ARTIST" 100-31005C

To increase the length, as well as fastening pullers and other devices, there is a thread at the working end. The universal set includes:

• pullers for dismantling bearings from the axle - 1 pc., from the crankcase - 2 pcs.;
• thrust bushing - 1 pc.;
• pin with a handle and a shock weight sliding on it - 1 pc.;
• easy-to-carry transport case made of hard plastic — 1 pc.

Buying a reverse hammer necessary for car repair for removing bearings complete with universal nozzles, the buyer gets the opportunity to use it also for removing dents.

Reverse hammer for removal of bearings in a set with replaceable paws Forsage F-664

The purchase of a Forsage tool kit under the article F-664 will delight both professionals and car repair enthusiasts in their own garage. The versatility of use is due to the variety of devices and grips, both when pressing bearings from axle shafts, and for removing a disk from a wheel hub. The optimal weight of the impact weight provides a wide range of impact force and does not create inconvenience during operation. It is better to buy a puller for a reverse hammer in the kit.

Abandonment F-664

The tool delivery set fully covers the needs for dismantling the car suspension being repaired and includes:

• T-bar assembly with sliding impact weight;
• heads for two- and three-arm grips;
• nozzle with a hook;
• adapter with a turnkey hexagon;
• paws and means of fastening them to the heads;
• 2 axle disc pullers - short and long;
• thrust nut.

The entire arsenal of devices is placed in a plastic case, convenient for storage and transportation.

Set of bearing puller with hammer LICOTA ATA-0199

A specialized tool made of stainless steel is capable of pressing bearings with an internal diameter of 15 to 32 mm from the housings. The puller is attached to the reverse hammer by means of a threaded connection. The displacement of the center of gravity of the sliding weight towards the thrust washer, which protects the fingers on the handle, increases the impact force during dismantling.

RATE ATA-0199

The set consists of 3 elements:

• 2 collets - for holes 15-22 and 25-32 mm;
• all-metal mechanism with a threaded tip.

Case for storage and transportation is made of metal.

Reverse hammer for internal bearings 8-34 mm 10 items "MASTAK" 100-31010C

The tool is designed for dismantling or pressing out bearings by impact using a thrust puller or collet clamps, of which there are 5 in the set. Hole diameters from the lower limit of 8 mm to the upper 34 mm.

"ARTIST" 100-31010C

Actually, the reverse hammer for pressing out bearings is a guide along which the weight slides. The hexagon on the female end is used to connect to the spacer rod. All collets have slots for gripping with a wrench.

The thrust bearing puller has two sliding legs with variable fixation. The sliding impact weight is all-metal, with a figured groove under the palm. Set composition:

• collet clamps 8-11, 12-17, 18-23, 24-29, 30-34 mm;
• percussion mechanism assembly;
• rod adapters M6, M8, M10;
• stubborn puller.

The set is supplied in a hard plastic case.

Reverse hammer 16 items AE&T TA-D1051-1

Tool for dismantling bearings from axles and pressing them out of their seats. The kit can be purchased for work with vehicle components, for example, to remove the hub. A set of universal pullers is useful for the disintegration of other technical mechanisms that require the extraction of parts or their components by localized impact.

See also: Car interior heater "Webasto": the principle of operation and customer reviews

AE&T TA-D1051-1

Along with the comfortable T-handle, the case comes with a few other useful features. Adapters and special fasteners will help to quickly dismantle the bearings from the block or from the axle. A set of universal pullers complements the kit, which includes:

• axle with impact weight for removing bearings;
• heads for capture - two-fingered and three-fingered;
• detachable paws;
• adapter for removing the disc from the hub;
• persistent nut;
• fasteners, adapters and limit switches.

A wide range of uses is provided by the collapsible design of the grips.

Force internal bearing puller set.