Active car wash foam - how to use it?

Paint is the decoration of every car. To prevent scratches, microdamages and chips from appearing on its surface, experts recommend avoiding public car washes, as a large amount of dirt and sand accumulate on their brushes. Therefore, contactless cleaning is the safest solution for the car body. Active car wash foam is an effective method of pre-softening dirt before washing. How to use it?

What will you learn from this post?

• What is active foam and what are its effects?
• What is the best active foam?
• How to wash a car with active foam?

Shortly speaking

Active foam is an effective way to clean the car body from dried dirt. Its composition rich in active substances and thick consistency allow you to remove dirt in a matter of seconds and prepare the product for proper washing. Active foam is applied with a special foam sprayer, which evenly distributes the solution over the surface. The best effect is to use a solution of a well-known brand in a ratio of 1:10. Don't forget to lather the cold polish, moving from the wheels and sills to the roof.

Active foam for car wash

The main task of active foam is softening of lumps of dirt on varnish, which can cause the appearance of small scratches on its surface during subsequent washing with a sponge or cloth. Foam preparation is applied to the car body without contact with a special steamer, and then washed off with clean watertherefore, the risk of minor damage to the paint is greatly reduced.

Active foam blower

Most drivers start washing their car with a quick rinse with pressurized water. This method only works for slightly dusty cars that need a little freshening up. Water quickly drains off the car body and is not able to effectively dissolve dirt on its surface. A much better effect is achieved when using active foam on the varnish. stays in the car longer due to its thick consistency. For its application, a pressure or manual foam sprayer is required. There are three types of equipment available in the avtotachki.com store that allow you to distribute active foam over the car body: self-contained high-pressure washers with a foam sprayer included, pneumatic guns with a detergent tank and additional pressure-compatible foam concentrates. washers. The advantage of the latter is the possibility of using more aggressive chemicals. Due to the fact that the detergent is taken from the external container and sent directly to the nozzle, it does not pass through the entire pressure washer system, damaging its rubber hoses.

Adequate selection of active foam

Active foams with a more delicate and strong effect are available in stores. The degree of their effectiveness is influenced by the amount of active ingredients used. The type of preparation should be selected depending on the surface to be cleaned and the degree of soiling.... A softer, pH neutral foam will work for car, bicycle, or garden furniture, while a stronger detergent containing, for example, silver and copper ions should be used for car parts, wheels or truck tarpaulins.

Additional protective agents in active foams

Some reactive foams available in stores contain additives such as preservatives, fragrances, or even wax. These types of preparations are recommended for people who often use active foam as their main freshener for a slightly dirty or even dusty car. After applying the foam and rinsing it thoroughly, the car body will not only shine, but also a thin protective layer forms on its surface prevention of re-deposition of pollutants.

Active foam - what proportions to choose?

The proportions in which it is used also affect the effectiveness of the active foam. The best effect is achieved by diluting 1 measure of the preparation for 10 measures of water in the foam sprayer tank. Such aspect ratio (1:10) they also affect performance. One package of active foam allows you to wash your car or other surfaces with varying degrees of contamination several times.

Pre-wash affects detailing efficiency

Car wash with active foam is simple, quick and effective. It is important to apply it on a cold and dry varnish, and to carry out the whole process in a shaded place. We start applying the preparation from below - wheels and thresholds, i.e. dirtiest places.... Then slowly move to the body, windows and roof of the car. This sequence will increase the efficiency of the entire cleaning process. The foam applied to the varnish has a rather thick consistency, thanks to which it lasts longer even on slippery surfaces, while dissolving lumps of dirt. After you have churned the entire vehicle, it is recommended to wait a few minutes and then rinse the product with water in the same order in which it was applied - down up. However, be careful that the foam does not dry on the machine. After the pre-wash is over, proper cleaning will be much faster and safer for the car body.

Active foam from trusted manufacturers

The brand of the drugs used also affects the efficiency of the car wash process with active foam. You should apply for cosmetics from well-known and trusted manufacturers, such as K2 or Moje Auto, which are of high quality, appropriate level of concentration of active measures, pleasant aroma and excellent protective properties. Active foam packs are available in several convenient sizes.

Active foam can be used to clean not only cars, but also trailers, awnings, car parts, bicycles, buildings, garden furniture and other items to refresh. Proven brand name products and foaming agents for their application can be found at avtotachki.com.

Also check:

Paint decontamination - 5 steps to a car body that shines like a mirror

Brand K2 - an overview of recommended car cosmetics

Does frequent car wash damage the paintwork?

.