Car ramp: uses, benefits and prices

A car ramp is a tool that performs the same function as a car jack. Thus, it is used to lift the vehicle to work under the vehicle and to stabilize it to work in complete safety. The ramp of the car has an inclined plane and a stop in which the wheels jam.

🔍 What is a car ramp?

One car ramp lifting tool. It is used for lift the car place it at a safe height so that you can access the underbody and the underbody of the car without risk of an accident, so that you can work under the car without risk of falling.

The car ramp also allowsimmobilize them Wheels car to stabilize it well. This is primarily a professional tool, unlike, for example, a jack and candles, which many motorists have. However, it is quite possible for a person to purchase a ramp for a car if he himself carries out many operations and repairs his car.

The car ramp has many advantages: it allows you to work comfortably and safely, but at the same time it is easier than with a jack. You will have more room to work and more visibility.

The car ramp consists of slope plan at the end of which is corkagainst which the wheels of the car are wedged: this is what immobilizes it in all its stability. The vehicle can be mounted on a ramp with either the front or rear wheels, depending on the type of work being done under the vehicle.

The carriage ramp is made of welded pipes. Its dimensions vary, as does the carrying capacity that the ramp can withstand. Therefore, be careful when purchasing a ramp and do not hesitate to provide a ramp with a load capacity that exceeds the weight of your vehicle.

There are different models of car ramps. In most cases, they are made of metal, but they can also be made of rubber or plastic. However, metal ramps are more durable. it's the same car ramps with basketthat allow you to lift the car further, and folding ramps which are easier to store.

🚗 Car ramp or candle?

Like a car ramp candle allows the vehicle to be lifted to work underneath. But as the car ramp goes under the wheels, jack stands are placed next to them, at the points marked on the sill body.

Both tools perform the same role: lifting the vehicle and securing it. However, jacks and vehicle ramps cannot be used. not always in the same situations... Thus, an operation requiring the engine to be level, such as emptying, cannot be performed on the ramp.

Therefore, candles and ramps are best viewed as additional tools that every mechanic should have at the same time and use according to the job being done.

👨‍🔧 How to put the car on the ramp?

To put the car on the ramp, you only need drive a car on both ramps. You can install the machine in the front or in the back. If you need to raise all four wheels to raise the entire vehicle, jack the vehicle up to place it on the last two ramps.

To work in complete safety, consider put hand brake... You can also engage first gear. First of all, the wheels must be well wedged against the stop of the car ramp. Finally, it is always recommended double lifting tools to prevent accident.

💰 How much does a car ramp cost?

The price of a car ramp depends on the type and model of the selected ramp. Depending on where you buy the ramp and its capacity, the price of a car ramp may go up. from 25 to 50 €... Obviously, you will need one wheel for each wheel to lift the car.

If you opt for a foldable car ramp, count instead 150 €... Finally, keep in mind that you can buy a car ramp from an auto center (Norauto, Feu Vert, etc.), on the Internet at many e-commerce sites, or in specialized auto stores.

So now you know everything about the car ramp! As you already understood, it is important that there are at least four of them if you regularly perform work under the car. In the garage, mechanics use drawbridges instead, which are much more expensive.