Car compressor with receiver: characteristics of the best models
Content
Excellent portable 12 volt autocompressor with receiver. Piston type design. The current consumption is only 14A, so if this car compressor with a receiver and a 12-volt power supply is compared with the first model from Berkut, then it is better suited for being powered from a cigarette lighter.
Inflating wheels and connecting pneumatic tools are standard work for any service station that is required when servicing a car. A productive car compressor with a receiver allows them to be carried out at no extra cost.
Car compressor BERKUT SA-06
Universal, relatively compact piston autocompressor. The manufacturer reports on the possibility of using the device for pumping wheels and working with pneumatic tools. The included adapters allow you to inflate inflatable boats.
Car compressor BERKUT SA-06
Key Features:
- nominal receiver volume - 5,7 l;
- pressure (max) - 14 atm., there is a built-in analog pressure gauge;
- guaranteed productivity - 55 liters per minute;
- current consumption - 30A, operating voltage - 12V, power supply - car cigarette lighter;
- weight - 10,6 kg;
- cable length - 2,4 m, air hose - 7,5 m.
But this car compressor with a receiver (12 volts) is needed not only for passenger cars. The device is used in the installation of air suspension of commercial vehicles.
Oil compressor Wester LE 050-150 OLC, 50 l, 1.5 kW
Type of construction - piston with oil lubrication (a similar solution is used in household refrigerators). Stationary equipment suitable for most small workshops. This car compressor with reservoir is ideal for working with pneumatic tools, painting, can be used (with an adapter type IG-041) when inflating tires.
Oil compressor Wester LE 050-150 OLC, 50 l, 1.5 kW
Key Features:
- receiver for 50 l;
- maximum pressure - 8 bar (7,9 atm.), It is possible to adjust, there is a built-in pressure gauge;
- power - 1,5 kW.
- productivity - 206 l / min;
- operating voltage - 220 volts, mains powered;
- maximum engine speed - 2850 per minute;
- weight - 30 kg, ease of movement is provided by two transport wheels.
Oil compressor PATRIOT Pro 24-260, 24 l, 1.8 kW
Stationary type compressor, small service stations and garages - this is its scope. Piston-type design with oil lubrication, the manufacturer guarantees an increased resource.
Oil compressor PATRIOT Pro 24-260, 24 l, 1.8 kW
Main technical characteristics:
- receiver volume - 24 l;
- developed pressure - 8 bar;
- power - 1,8 kW;
- productivity - 260 l / min;
- mains powered, 220-volt power supply required;
- number of revolutions - up to 2850 per minute;
- weight - 23 kg, there is a transport handle and wheels.
Such a car compressor with a receiver is designed for small service stations and private garages. Good for working with pneumatic tools, painting. In the presence of an adapter, it allows you to pump up the wheels, it is used to purge hard-to-reach places.
Oil-free compressor Metabo Basic 250-24 W OF, 24 l, 1.5 kW
A good semi-professional model. Piston design, oil-free. Compared to competitors, it has a slightly lower noise level.
Oil-free compressor Metabo Basic 250-24 W OF, 24 l, 1.5 kW
Main technical characteristics:
- receiver volume - 24 l;
- maximum pressure - 8 bar;
- rated power - 1,5 kW;
- output capacity - 120 l / min;
- powered by a household power supply, so a compressor with a receiver of this type cannot be installed in a car;
- maximum engine speed - 2850 per minute;
- weight 24 kg, there is a transport handle, two wheels for ease of movement.
We recommend choosing this device for occasional work, it is suitable for small service stations. Continuous use for more than 25-30 minutes is not recommended. Otherwise, you need a homemade heat sink (not provided by the manufacturer). There is a pressure adjustment (bleed valve), factory overheating protection and a built-in pressure gauge. Not the most powerful, but quite productive option from a trusted company.
Car compressor Aggressor AGR-3LT
Excellent portable 12 volt autocompressor with receiver. Piston type design. The current consumption is only 14A, so if this car compressor with a receiver and a 12-volt power supply is compared with the first model from Berkut, then it is better suited for being powered from a cigarette lighter. Less load on the vehicle's on-board network does not overload the fuses. Also included are adapters that allow you to power the device directly from the car battery.
Car compressor Aggressor AGR-3LT
Other specifications:
- receiver volume - 3 l;
- maximum pressure - 8 atm.;
- power, which requires a car compressor with a 12 volt receiver, from a car cigarette lighter or rectifier;
- nominal productivity of the "Aggressor" - 35 l / min;
- length of the supply cable - 2,4 m, air hose - 10 m;
- weight - only 6,4 kg.
Confirming its reputation, AGR does not skimp on the package: in addition to adapters for terminals, it has a tire inflation gun and an adapter for using pneumatic tools.
