Peugeot EP6FADTX engine
Content
The 1.6-liter Peugeot EP6FADTX engine was produced at the Duvrin plant from 2017 to 2022 and was installed on models such as 308, 508, DS7, DS9 in combination with an 8-speed automatic ATN8. There were two different versions of such a unit: 5GC for DS cars and 5GG for Peugeot.
Серия Prince: EP6CDT EP6CDTM EP6CDTR EP6FDT EP6FDTM EP6FADTXD
Specifications of the Peugeot EP6FADTX 1.6 Puretech 225 engine
| Exact volume | 1598 cm³ |
| Supply system | direct injection |
| Internal combustion engine power | 225 hp |
| Torque | 300 Nm |
| Cylinder block | aluminum R4 |
| Block head | aluminum 16v |
| Bore | 77 mm |
| Piston stroke | 85.8 mm |
| Compression ratio | 10.2 |
| Features of the internal combustion engine | Valvetronic |
| Hydraulic compensators | Yes |
| Timing drive | chain |
| Phase regulator | inlet and outlet |
| Turbocharging | BorgWarner K03 |
| What kind of oil to pour | 4.25 liters 0W-30 |
| fuel type | AI-95 |
| Ecologist. class | EURO 6d |
| Exemplary. resource | 250 000 km |
EP6FADTX motor catalog weight is 138 kg
Engine number EP6FADTX is located at the junction of the block with the box
Fuel consumption Peugeot EP6FADTX
Using the example of a 508 Peugeot 2020 with automatic transmission:
| City | 7.6 liters |
| Track | 4.6 liters |
| Mixed | 5.6 liters |
Which models are equipped with the EP6FADTX 1.6 l engine
| DS7 I (X74) | 2017 – 2021 |
| DS9 I (X83) | 2020 – 2022 |
| 308 II (T9) | 2017 – 2019 |
| 508 II (R8) | 2018 – 2021 |
Disadvantages, breakdowns and problems of the EP6FADTX internal combustion engine
The motor appeared not so long ago to collect full statistics of its breakdowns
On the forums there are complaints only about the replacement under warranty of the wiring harness and fuel pump
Due to the aggressive operation of the Start-Stop system, the chain can stretch up to 100 km
The fuel injection here is only direct and the intake valves are quickly overgrown with soot.
Other internal combustion engine problems are associated with electrical failures and are treated with firmware
