Low beam headlamps: use, maintenance and price
Content
. Lights your car have two functions: to see and to be seen on the road. In this article, we explain everything you need to know about your car's low beam headlights: when to use them, how to change them, and at what price!
🚗 When to use low beam?
. Lights intersection are the most versatile headlights in your car. They illuminate about 30 meters in front of you and can be used both day and night. Low-beam headlamps allow other motorists to detect you, but also allow you to see the road better.
During the day, low beam headlamps are used in adverse weather conditions, such as rainy or foggy weather.
In the evening, they should be used as soon as night falls. The dipped headlights do not blind drivers driving in the opposite direction. In fact, the low beam headlamps are designed to further illuminate the right side of the road, which is less of a hassle for motorists arriving on the other side.
🔎 Inoperative low beam headlights: what to do?
If your low beam headlights no longer work, you have no choice but to replace bulbs defective. We advise you to always have new lamps in your car so as not to be on the road without a low beam.
Keep in mind that if you don't turn on the low beam headlights and pass the test, you risk up to 135 € per dayfine и Removal of 4 points on your driver's license. Therefore, it is important that the replacement of dipped beam bulbs is not delayed.
🇧🇷 How to change the low beam bulb?
Did your low beam just let you down? Not sure how to change low beam bulbs? Don't panic, we will explain in detail how to do it!
Required material:
- New bulbs
- Protective gloves
Step 1. Find the faulty side
Before changing bulbs, you must determine which one no longer works. Just turn on your headlights and stand in front to perform this check.
Step 2: disconnect the battery
To avoid the risk of electric shock, always disconnect the battery first. Open the hood, then remove the battery terminals.
Step 3. Disassemble the defective bulb.
Find out where your lighthouse is. Remove the black rubber disc and set it aside. Then unscrew the headlight bulb base by disconnecting the electrical wires connected to the bulb. Now remove the faulty low beam bulb.
Step 4: Install a new light bulb
Always check that the new bulb is identical to the old one. In this case, replace the lamp in its original place, connect the necessary wires and replace the rubber disc.
Step 5. Make sure everything works
Remember to reconnect your battery terminals. Now make sure your bulb is working properly by turning on your headlights. Low beam bulb replaced!
?? How to adjust the low beam?
Low beam headlamps are mandatory and must be correctly adjusted. Certain measures are recommended to adjust the dipped headlights:
- One item included from 50 to 120 cm du sol;
- maximum 40 см external sides;
- Minimum deviation 60 см between the two dipped headlights.
It is relatively easy to adjust the low beam on newer vehicles. On the side of the steering wheel, you will find a dial for adjusting the headlights.
Adjust the height if necessary, especially if your vehicle is heavily loaded. You can also manually adjust the headlights; Read more about the procedure in this article.
?? How much does a low beam bulb cost?
Low beam lamps are not very expensive. Count on average from 6 to 10 euros for a light bulb.
You can also go to the garage to replace the light bulbs. Therefore, it will be necessary to add to this price the cost of labor, which should not be very high, given that the intervention is relatively simple and quick.
Now you know all about using low beam headlights. As you already understood, they are not only required, but also necessary for safe driving. Our online garage comparator is here to help you if you need a low beam replacement mechanic!
