How to use V-blocks for horizontal stock holding?

	V-Blocks can be used to hold round workpieces horizontally under a milling or drilling machine. This is useful if you need to machine the body of a metal cylinder or pipe.
	Step 1 - List your shares Place the workpiece in the V-channel of the V-block and turn the clamp threaded nut until it contacts the workpiece.
	The part should now be firmly held in place.
	If you are working on a particularly long cylindrical workpiece, you may need more than one block.
	Step 2 - Install the V Block Place the wedge block in a vise or T-slots on the machine. The block must be positioned horizontally so that the longest side of the block is parallel to the machine table.
	Now you are ready to start processing the workpiece.

Posted

February 20 2023

in