How to use a microwave leak detector?

	Step 1. Turn on the microwave leak detector. If there is a power button, press it to activate the device.
	Step 2 - Zero Microwave Leak Detector If necessary, press the appropriate button or wait until the microwave leak detector is zeroed. Check the instructions for each individual model to find out what steps are required.
	Step 3 - Prepare the microwave. Place the container of microwave water in the microwave, close and turn it on for about 30-60 seconds.
	Step 4 – Microwave Detection Keep the microwave leak detector at the specified distance from the microwave oven. Move the detector around an operating microwave oven at this distance, focusing on the door seal, vents, and other vulnerable areas.
	Step 5 - Interpreting the Results When testing your microwave, monitor the readings to make sure they are within safe limits (below 5mW/cmXNUMX).2). If this is not the case, turn off the microwave oven immediately and call a professional for inspection before use, repair or disposal.

Posted

February 23 2023

in