How to use the ball joint puller?
Content
A ball joint remover, also known as a ball joint remover, allows the ball joints to be safely removed from your vehicle when maneuvering. Operating on the principle of a lever, it pulls the ball joint out of its place without damaging it or requiring effort from the operator using the machine.
🚗 How does the ball joint puller work?
Steering ball joints are essential to the handling of your vehicle: they are especially related to steering rods и steering rack... Replacing the car's ball joints requires special tools because the ball joints are held in place by a tapered fitting that goes through the tie rods and steering eyelet.
So everything is held in place by a nut and washer or pin for certain types of nuts. Dismantling patella this is a complex procedure in which you only need to remove one ball joint at a time to avoid damage parallelism out of the car.
Most ball joint removers are universal and are exactly the same size. However, for some specific vehicle models, it will be necessary to select a different size ball joint puller.
For example, sports and performance cars require a larger ball joint puller than light cars. Ball joint puller operating mechanism: use with adjustable lifting force depending on the type of work and the characteristics of the vehicle.
👨🔧 How to use the ball joint remover?
In addition to the ball joint puller, you will need to equip yourself with protective gloves, a jack and a toolbox to ensure that the steering ball joint is removed from your vehicle. First, let's start with unscrew the lock nut of the ball joint.
Then you can place the ball joint puller fork between the dust cover and the steering arm eyelet. It is at the level of the end of the conical part of the patella The patella remover adopts its fulcrum to perform the rest of the maneuvers.
Second, you must begin to carefully but firmly tighten the nut, allowing the ball joint puller to close. Be careful when detaching the patella do not sit under it so as not to damage you.
If your model of ball joint remover has a threaded portion, then you can adjust the distance between the jaws by placing the ball joint remover on the ball joint.
🛠️ How to remove the steering ball joint without a ball joint puller?
It is quite possible to remove the steering ball joint without a ball joint puller, but this requires patience и force... As with the Ball Joint Puller, you will need to remove each ball joint one at a time after assembling a new one. To remove the steering ball joint, you will need to do the following:
- You can start by loosening the lock nut. : This will make it easier to tear off the patella;
- Apply strong blows to the tapered axis of the kneecap. : it will get out of the control of the management. This method can only work if the patella is not too tight, otherwise you will spend hours trying to detach it;
- You can place one of your tools on the ball joint. : This technique allows you to absorb the blows of the kneecap. If you choose this method, be careful when using it because you can damage other surrounding parts by pushing too hard on the kneecap.
- You will install a new steering ball joint. : you will need to repeat the steps for each ball joint one by one.
💸 What is the price of a ball joint puller?
The ball joint puller is an indispensable tool for professionals working in the workshop. Thus, you can invest in this equipment if you are good at auto mechanics and can replace the steering ball joints yourself.
On average, a patella remover costs from 10 € and 100 € depending on the brand and size of the latter. Please check before buying compatibility ball joint puller with ball joints of your car in the size of the latter.
A ball joint puller is an affordable tool for any budget, but it requires a good grip and use for this type of maneuver. Indeed, ball joints are directly connected to many sensitive parts that cannot be damaged during various manipulations.
