How to remove the steering wheel on Largus
For most owners of Lada Largus, the steering wheel is quite comfortable. But there are quite a few drivers who like to wear either braids on the steering wheel, or sheathe it. If you are going to sheathe it, then the ideal option would be to completely dismantle the steering wheel in order to do this work without unnecessary inconvenience.
Required tools and the procedure for performing work on removing and installing the steering wheel
The principle of repair is no different from the Renault Logan car, which is a complete analogue of Largus. An example will show how to work with a driver's airbag.
First of all, disconnect the minus terminal from the battery.
After that, using two rods with a diameter of about 5 mm from the inside, we push them into the holes of the airbag module. One of the holes is clearly shown in the photo below:
Then we apply a little effort, and at the same time carefully move the module up and disconnect the power wire, which is clearly shown in the photo:
When the plug is disconnected, you can loosen the steering wheel bolt using a special bit with a TORX T50 profile, but not completely. Then, from the inside, we try to knock the steering wheel off the slots, and after that we finally unscrew the mounting bolt.
And now you can easily remove the steering wheel and carry out all the necessary operations. Installation is carried out in reverse order.