How to secure a tablet, phone, recorder in a car on the dashboard

When choosing how to fix the smartphone on the car panel, you need to pay attention to the magnetic holder that is inserted into the air duct grille.

Information on how to mount a tablet in a car on a dashboard will help you use gadgets on the road as conveniently and efficiently as possible. Many ready-made options are available for drivers to mount on a horizontal plastic surface or in a duct grille. If desired, the holder can be made with your own hands.

Why mount a tablet, phone, DVR in a car on a dashboard

Using gadgets in the car should be convenient and efficient. A car dashboard is a universal place where you can fix a DVR, smartphone or tablet.

The level of the dashboard is not much below the line of the eyes, which allows you to quickly read information from the phone screen. When using a tablet navigator, it becomes even easier to recognize route details.

A dashboard-mounted recorder is a good idea because it sets the optimal shooting angle. The device records all events on the road, for example, communication with the traffic police.

DVR on the dashboard of a car

The camera mounted on the torpedo can be quickly deployed in the desired direction. Such mobility of the gadget will allow you to shoot everything that happens outside the car and inside the car.

For these reasons, it is worth figuring out how to fix a tablet and other mobile equipment on the car panel.

Ways to install a tablet, smartphone, DVR on the panel

Before fixing any PDA models, you need to degrease the surface of the panel. It is necessary to choose a mounting method taking into account the characteristics of the device.

On an elastic band

For this installation of the phone in the car, there must be holes or protrusions for which you can hook the fixing elements.

The rubber band is easily threaded into the holes of the grilles of the air supply system and is brought back through them. It is convenient to do this with a paper clip.

You can thread your phone or tablet into the formed loop. In order for the gadget to be pressed tightly against the plastic grill, you need to use a thick and wide elastic band.

Mounting a smartphone on an elastic band

This is a quick working option for those who do not know how to fix the tablet in the car on the dashboard.

This solution has one drawback - a small part of the screen will be covered with an elastic band.

On a magnetic suction cup

The peculiarity of such an installation comes down to fixing the holder on the dashboard with glue that is harmless to the plastic of the dashboard.

The second part of the device has a round magnetic latch that attracts the body of the tablet or phone.

To keep the gadget on a magnet, a metal plate on a suction cup is attached to its case or body.

Mounting gadgets on a magnetic suction cup

In the center of the holder is often a ball rotating in any direction. It allows you to move the gadget to a position convenient for the driver.

Installing the tablet on a magnetic suction cup is easy. Such a holder can be quickly removed and fixed in another place.

On glue

Having figured out how to fix the tablet in the car on the dashboard, you need to choose a good binder.

The right glue will allow you to fix any kind of holder on the plastic. One suitable option is silicone sealant.

You can stick gadgets on double-sided tape. In this way, it is convenient to attach magnetic washers for the DVR to the torpedo.

How to fix the tablet in the car on the dash in the slot

There are different models of holders that are mounted to the ventilation grille plates. Wide slots allow you to fix devices even large sizes.

Mounting on the ventilation grill

When you need to quickly decide how to fix the phone holder to the car dashboard, it is better to take a universal adjustable bracket. It has several advantages:

• plastic brackets hold the smartphone well without scratching its body;
• you can rotate the tablet, fixing it in a horizontal or vertical position;
• the width of the clamp is adjusted by means of a retractable limiter.

When choosing how to fix the smartphone on the car panel, you need to pay attention to the magnetic holder that is inserted into the air duct grille.

Magnetic holder

There will be a rubber layer between the magnet and the metal ring on the phone. It will provide soft and durable compression.

How to make a DIY phone holder

One simple option is to use a clerical clip. Those who are looking for a way to mount a smartphone on the dashboard of a car will need to follow a few simple steps:

• Bend two paws from a thick wire. A gadget will be inserted between them.
• Tape the bent wire to the retracted paper clip staples with thin adhesive tape.
• Slightly unclench the clerical clamp, put it on the air duct plate and release.

Next, you need to insert the phone / tablet into the wire paws.

It is also useful to know how to assemble a magnetic phone holder on the car dashboard.

Materials and Tools

To assemble the magnetic retainer, you will need to prepare:

• glue;
• flat magnet (purchased or removed from the speaker);
• plastic washer for the size of the magnet;
• a round piece of rubber;
• thin transparent tape;
• small thin metal plates;
• double-sided adhesive tape.

First you need to glue a plastic washer to a flat magnet from the back, and from the front - a piece of rubber. These details can be made with your own hands, cut out from any unnecessary object.

After you need to glue the metal plates with thin tape. So they will not scratch the mobile phone. The plates are placed in the inside of the case, which is put on the smartphone. Attach them with double-sided adhesive tape.

The next step is to connect the magnet and the base of the holder. You can assemble this part from pieces of plastic using glue.

See also: Additional heater in the car: what is it, why is it needed, the device, how it works

DIY magnetic holder

How exactly to fix the phone on the car panel using such a holder, the driver decides on his own. This can be fixing in the air duct grill or installing a magnet on the horizontal plastic surface of the torpedo.

Ideas for assembling a holder with your own hands

When figuring out how to fix a DVR or tablet on a car panel, you need to consider other options for making a holder from improvised means:

1. Lace and two paperclips. Here you will need a cover for a gadget with a folding part. It needs to be bent so that the phone is open. A strong cord is drawn under the bend, the ends of which are attached to the far parts of the ventilation grilles. Staples are used for fixation. As a result, the phone in the case will hang on a cord.
2. Mounting plates Command. They have a curve along the bottom line where the tablet is inserted. The planks themselves can be fixed with glue. They must be installed so that the inserted device is slightly tilted backwards.
3. Selfie holder. Can be separated from the handle and connected to any plastic base suitable for fixing on the dashboard. The selfie holder itself will provide an easy change in the position of the gadget.

Using these ideas, you can choose the perfect option for attaching the tablet to the dashboard of your car.

DIY magnetic holder