How to replace the power seat switch
Auto repair

How to replace the power seat switch

09.11.2022 /

The power seat switch in your vehicle allows you to adjust the seat to suit your preferences. In the event of a breakdown, especially the driver's seat, it should be replaced.

Power seat position and operation is controlled by the power seat switch. In most vehicles, when the passenger presses the switch, the internal contacts close and current flows to the seat adjustment motor. The seat adjustment motors are bi-directional, with the direction of rotation of the motor determined by the direction in which the switch is depressed. If the power seat switch no longer works, this will be obvious because you will not be able to move the seat using the switch. Also keep an eye out for signs to check it out before it completely fails.

Necessary materials

  • Protective gloves
  • Repair manuals (optional)
  • Safety glasses
  • Screwdrivers
  • Clipping toolbar (optional)

Part 1 of 2: Removing the Power Seat Switch

Step 1: Disconnect the negative battery cable. Disconnect the negative battery cable and set it aside.

Step 2: Remove the seat trim panel.. Using a screwdriver, remove the screws securing the trim panel. Then, pull the seat upholstery panel away from the seat cushion to release the retaining clips. The use of a trim panel removal tool is optional.

Step 3 Remove the screws from the switch panel.. Using a screwdriver, remove the screws that secure the switch panel to the trim panel.

Step 4 Disconnect the electrical connector. Remove the switch electrical connector by pressing the tab and sliding it. Then remove the switch itself.

Part 2 of 2: Installing the New Power Seat Switch

Step 1: Install the new switch. Install the new seat switch. Reinstall the electrical connector.

Step 2: Reinstall the Switch Panel. Using the same mounting screws you removed earlier, attach the new switch to the switch panel.

Step 3: Replace the seat trim panel.. Install the seat trim panel. Then insert the screws and tighten them with a screwdriver.

Step 4: Connect the negative battery cable.. Reconnect the negative battery cable and tighten it.

Here's what it takes to replace the power seat switch. If you'd rather have this job done by a professional, AvtoTachki offers a qualified power seat switch replacement for your home or office.

Add a comment