Rust converter: role, application and cost

The presence of rust on the mechanical parts of your car can sometimes be a problem, besides not being aesthetically pleasing. One way to get rid of rust is to use a rust converter. This product dissolves rust and protects the metal from deformation.

🚗 What is a rust converter used for?

In mechanics rust converter used to clean automotive parts that are prone to rust over time. These parts are usually found on the engine block, wheels, or antennas of your vehicle.

Scratches on bodyworkyour car can also cause rust. But too much rust can sometimes cause car parts to malfunction. This is why it is important to remove rust whenever possible.

There are several products available for cleaning rust stains; Rust converter is one of them. It has two main actions: attacks and dissolves rust due to the acidic composition. This way, the rust layer can come off and disappear.

In order to prevent the reoccurrence of rust, the rust converter forms a kind of protective layer which prevents the contact of water and oxygen with the metal and, therefore, the formation of this layer of rust.

🔍 Why use a rust converter?

In some cases, it is possible to remove rust from a metal part without using a rust converter. However, for convenience, it is recommended to use a rust converter in the following cases:

• You can not do not grind the part, or sanding is not enough;
• The room is unavailable and cannot be disassembledfor example, you will not be able to rinse it properly.

Also note that a rust remover is an economical, practical and uncomplicated solution for removing rust from your vehicle. However, be careful to read the instructions carefully and don't hold the product with too heavy a hand, because otherwise you might just get the opposite of what you were hoping for!

🔧 How is the rust converter applied?

The rust converter is relatively easy to use. Here are a few steps on how to use a rust converter. To complete this tutorial, you will need a paintbrush or spray bottle.

Required material:

• brush
• Sprayer

Step 1: apply the product

Apply the product directly to the rust stain using a brush or spray.

Step 2. Leave it on for 10 minutes.

Wait about 10 minutes for the rust to dissolve.

Step 3. Leave it on for 24 hours.

Wait about 24 hours for the product to dry completely and the protective layer takes effect.

Step 4: paint the room

If you need to repaint a part, you can apply the paint as soon as the resin dries. Your car parts are now completely free of rust!

💰 How much does a rust converter cost?

If you are buying a rust converter for car repair, the price can vary greatly depending on the brand and quality of the product you choose. Among the most famous brands you will find: Rustol rust converter, Wurth rust converter, Julien rust converter, Ferose rust converter ...

count ten euros for low-performance rust converters and approx. 60 € for the most effective brands. However, be careful not to be tempted by entry-level products, which are often of inferior quality.

Now you know everything there is to know about Rust Converter! If you need a garage to take a deeper look at your vehicle, our garage comparator can help you find the best mechanic near you and at the best price!