Mount for a tablet in a car on a dashboard - TOP-10 models
Content
Mobile devices turn the car into a mobile office. For comfortable work with the gadget, drivers buy a car mount for a tablet, iPad and smartphone. We have compiled a rating of the top 10 holders from Yandex.Market. These devices, according to buyers, are the most effective in use and meet the price-quality criterion.
Mobile devices turn the car into a mobile office. For comfortable work with the gadget, drivers buy a car mount for a tablet, iPad and smartphone. We have compiled a rating of the top 10 holders from Yandex.Market. These devices, according to buyers, are the most effective in use and meet the price-quality criterion.
Ppyple CD-NT holder
Universal holder for a tablet on a dashboard in a car with an installation slot in a CD drive. Sliding clips allow you to fix a device up to 19 cm wide. In addition to a tablet, you can attach a smartphone or even a small push-button phone. 360° rotation. Produced by Ppyple from South Korea.
Table 1. Characteristics of Ppyple CD-NT
| Material | ABS plastic |
| Diagonal mob. devices (inches) | 4 ″ -12 ″ |
| Mobile width devices (mm) | 125-190 |
| Tablet / smartphone attachment method | Clip |
| Price for "Yandex.Market" (rub.) | 1 890 |
From the point of view of users, the holder is of very high quality. The plastic is strong. The mobile device sits tightly in the clamps. On a bumpy road does not pop up, even in a cold cabin. Almost all users have rated Ppyple CD-NT 5 stars. Only one car owner gave 4 stars.
Holder Ginzzu GH-583
Universal device for fixing a smartphone or tablet. It has 3 mounting options: on the windshield, air duct grille and front panel. Made from impact-resistant ABS plastic. The design has a flexible bracket, 170 mm long. Tilt angle 120°, swivel 360°. Black colour. The holder will provide optimal support for mobile devices, provide the driver with additional comfort and decent safety. Manufacturer Taiwan.
Holder Ginzzu GH-583
Table 2. Characteristics of Ginzzu GH-583
| Material | ABS plastic |
| Dimensions (mm) | X x 140 105 75 |
| Mobile width devices (mm) | 50-115 |
| Tablet / smartphone attachment method | Clip |
| Price for "Yandex.Market" (rub.) | 490 |
Users highly appreciated the capabilities of Ginzzu GH-583. The holder of a smartphone and tablet in a car is easy to mount on a dashboard or windshield. With one hand, you can adjust the width to fit your smartphone. The construction is strong. True, in frosts the suction cup does not hold well on the glass. But still, users unanimously gave the device 5 stars.
Holder Defender CH-223
Headrest tablet holder. The manufacturer claims that the device is also suitable for smartphones. However, this is not the case, as angry users write about on the network. The construction is solid. The holder itself is attached between the arcs of the headrest. A tablet is inserted into the sliding frame. There is a 360° swivel device, which is convenient for children to watch cartoons. Black colour. Produced in China by order of the Russian company Defender.
Holder Defender CH-223
Table 3. Characteristics of Defender CH-223
| Material | Plastic |
| Diagonal mob. devices (mm) | 7 ″ -10.1 ″ |
| Mobile width devices (mm) | 110-220 |
| Tablet / smartphone attachment method | Clip, hook |
| Price for "Yandex.Market" (rub.) | 470 |
The holder caused almost no complaints from buyers, except for the inconvenience of mounting the tablet itself. That is, you first need to insert the gadget into the frame, and only then fix the design in the headrest. As for the rest, users agreed in one opinion: the Defender CH-223 model fully complies with the price-quality criterion. Most rated 5 stars.
Holder ZiPOWER PM6619
Another gadget fixer on the headrest. Helps passengers in the back row watch videos or read news on a tablet. Made from impact resistant plastic. Soft silicone pads securely fix the device. Swivel mechanism 360°. The ZiPOWER brand is owned by an American company with production in China.
Holder ZiPOWER PM6619
Table 4. Specifications of ZiPOWER PM6619
| Material | Plastic, silicone |
| Diagonal mob. devices (mm) | 7 ″ -11 ″ |
| Mobile width devices (mm) | 122-240 |
| Tablet / smartphone attachment method | Clip, hook |
| Price for "Yandex.Market" (rub.) | 680 |
Family car owners strongly approve of the ZiPOWER PM6619 holder. On a long journey, children calmly watch their favorite cartoons and movies and do not distract their parents. The quality of the polymer material is at a high level. But rubber (silicone) inserts upset more than one car owner after a few months of use. The tablet literally cut the seals. But in the segment of budget clamps, the American model ZiPOWER PM6619 deservedly broke into the favorites. User rating 5 stars.
Holder Ginzzu GH-682
Universal tablet and smartphone holder with windshield mount. Very comfortable. Equally useful for experienced drivers and beginners. It will provide high comfort and convenience of working with a tablet computer on the road. Securely mounted on the glass, so it is suitable for use as a registrar and navigator. Swivel mechanism 360°. Weight 271 g, country of origin Taiwan.
Holder Ginzzu GH-682
Table 5. Characteristics of Ginzzu GH-682
| Material | ABS plastic |
| Diagonal mob. devices (mm) | 7 ″ -10,5 ″ |
| Mobile width devices (mm) | 220-335 |
| Tablet / smartphone attachment method | Vacuum bracket (suction cup) |
| Price for "Yandex.Market" (rub.) | 320 |
Users note the good quality of the holder. It is durable and reliable. True, over time, the rattling of the springs appears. But this is noted by rare owners, most of them do not interfere with acoustic discomfort. They just don't feel it. The suction cup is securely held, even in severe frosts, as its contact surface is made of high-tech elastomers. It does not tan, so it maintains a vacuum. Users gave the Ginzzu GH-682 5 stars and one customer only 4.
Baseus Back Seat Car Mount Holder
Mount for the tablet with fixation in the headrest. The product is offered in 3 colors: white, black and red. The construction is strong, so vibrations are excluded. This provides a more comfortable viewing of video and reading an e-book to passengers in the back row. Easy to adjust tilt and swivel. It rotates 360° along the axis, so it will be easy for adults and children to adjust the device for themselves. Country of origin China.
Baseus Back Seat Car Mount Holder
Table 6. Specifications of Baseus Back Seat Car Mount Holder
| Material | ABS plastic, aluminum, silicone |
| Weight (g) | 280 |
| Diagonal mob. devices (mm) | 4.7"-11" |
| Mobile width devices (mm) | 140-180 |
| Tablet / smartphone attachment method | mechanical clamp |
| Price for "Yandex.Market" (rub.) | 580 |
“Extremely handy device,” is what users say about the Baseus Back Seat Car Mount Holder. Contact surfaces with soft pads, so do not scratch the gadget. The device is easy to install. The appearance is elegant, due to aluminum sliding spokes. Looks great in white with white headrests. There are some minor complaints about the swivel ball joint, but in general, users are satisfied. Most rating 5 stars.
Ppyple Dash-NT Holder
Universal holder for a tablet up to 10-11 inches in a car on a dashboard or windshield. Deserves the attention of iPad users. Made from high strength plastic. Operating temperature range -20°C +70°C. Convenient to use, as it allows you to insert the tablet into the clip with one hand movement. The delivery rotates in all planes. It has the function of moving forward, however, only 2 cm. Manufacturer PPYPLE INC (South Korea).
Ppyple Dash-NT Holder
Table 7. Characteristics of Ppyple Dash-NT
| Material | ABS plastic |
| Weight (g) | 290 |
| Diagonal mob. devices (mm) | 4 ″ -11 ″ |
| Mobile width devices (mm) | 123-190 |
| Tablet / smartphone attachment method | Mechanical clamp, vacuum fastener |
| Price for "Yandex.Market" (rub.) | 1 890 |
Most users gave the device a rating of 5 stars. The holder is of high quality, the vacuum Velcro fits snugly. Some noted that the fasteners did not peel off all winter, even in severe frosts. Before installation, the contact area is recommended to be cleaned of dust and degreased. Then the tablet, smartphone or iPad will not dive at your feet.
Onetto Universal Tablet Mount Easy Smart Tab 2
Futuristic tablet stand in the car on the panel, as well as on the windshield. Its base and shaft are reminiscent of the astronaut-engineer chair of the alien ship from the movie Prometheus (prequel to Alien). The latch allows you to install tablets and smartphones. There is a telescopic mechanism, so the driver can bring the gadget closer to 220 mm. Rotation 360°C. Manufacturer Onetto (South Korea).
Onetto Universal Tablet Mount Easy Smart Tab 2
Table 8. Features of Onetto Universal Tablet Mount Easy Smart Tab 2
| Material | ABS plastic, silicone, rubber |
| Weight (g) | 564 (gross) |
| Mobile width devices (mm) | 110-190 |
| Tablet / smartphone attachment method | Vacuum bracket (suction cup) |
| Price for "Yandex.Market" (rub.) | 2 090 |
“I was looking for a tablet mount. I didn’t find the best option, ”users of the Onetto Universal Tablet Mount Easy Smart Tab 2 holder write such reviews online.
Vacuum fastening is very reliable. Some admit that they cannot tear off without the help of a screwdriver. Thanks to the telescopic rod, you can place the gadget as comfortably as possible for use. The only thing that users complain about is that there is no washer in the kit for installing the platform on a rough surface. Have to buy separately. The rest of the device is excellent: 5 stars out of 5.
Defender Car holder 101+
Universal platform for small mobile devices. This holder is not suitable for installing a tablet in a car on a dashboard of 8 inches or more. The maximum allowable gadget is 7″. It is securely attached to the surface of the torpedo or windshield using a vacuum bracket (suction cup). Soft side clips securely and securely fix your mobile device. Rotate 360°C. Able to hold a gadget weighing up to 1 kg. There is a photo frame on the back. The Defender trademark belongs to a company from the Russian Federation. Made in China.
Defender Car holder 101+
Table 9. Characteristics of Defender Car holder 101+
| Material | ABS plastic |
| Mobile width devices (mm) | 55-120 |
| Tablet / smartphone attachment method | Vacuum bracket (suction cup) |
| Price for "Yandex.Market" (rub.) | 265 |
Many users note that the device is noisy. Simply put, it strums without a smartphone or tablet. Very compact. There are complaints about the side latches - the phone periodically drops and tries to slip out of the arms of the arms. But in general, the holder of his money is worth it.
Defender Car holder 201+
Budget universal holder. Allows you to place the tablet on the dashboard of the car or windshield. Firmly fixed with a vacuum bracket. Easy to use, as the design has 3 adjustments. Rotation 360°C. Country-manufacturer China, by order of the Russian Federation.
Defender Car holder 201+
Table 10. Defender Car holder 201+
| Material | ABS plastic |
| Diagonal mob. devices (inches) | 7 ″ -15 ″ |
| Mobile width devices (mm) | 110-200 |
| Tablet / smartphone attachment method | Vacuum bracket (suction cup) |
| Price for "Yandex.Market" (rub.) | 270 |
Despite the low cost, the Car holder 201+ model has decent quality. Adheres well to rough oak panel such as Hyundai Elantra. “He holds a tablet 8-ku. For the price, it doesn't get any better," wrote one user. In general, buyers are satisfied with the purchase of the device. Most gave 5 stars. For reference: in 2017, the Defender Car holder 201+ cost 870 rubles. The product has fallen in price by more than 3 times. This is another plus of the model.
