Windshield washer pump: work, change and price
Content
The windshield washer pump, located at the bottom of the windshield washer fluid reservoir, is the component that directs the fluid from the reservoir to the jets at the bottom of the windshield to clean it. This is an electrical accessory that can fail and cause the windshield cleaning system to stop working.
💧 What is the windshield washer pump used for?
La washer pump is, as the name suggests, part of the windshield washer system that allows you to spray Windshield washer fluid on the windshield to clean it wipers... It is usually located underneath or under the washer fluid reservoir under the hood.
The windshield washer pump works like a motor: it is connected to the electrical terminal and to the pipes that connect it to sprinklers are located at the bottom of the windshield and are therefore used to direct washer fluid there.
The windshield washer pump electrical connector is used to receive a command sent to it from direction column... The washer pump then serves for both front and rear windshields, although each can have its own independent pump.
Thus, the windshield washer pump plays a fundamental role in cleaning your windshield, as it is this pump that sends washer fluid from the reservoir to the injectors.
⚙️ What are the symptoms of the HS windshield washer pump?
Obviously, a sign of a faulty washer pump is system malfunction windshield washer. In fact, pump failure means the windshield washer fluid no longer reaches the injectors and splashes onto your windshield.
When you activate the windshield washer handle on the steering wheel, the wipers are activated to clean the windshield, but no fluid comes out of the injectors. However, this symptom does not necessarily indicate a malfunction of the washer pump: the nozzles may be clogged.
Therefore, first of all, it is necessary check the washer pump : If it works but nothing comes out, try cleaning the nozzles where lime can accumulate. Also check the hose that connects the washer pump to the injectors: clean it too and make sure it is not disconnected or kinked.
⚡ How to check the windshield washer pump?
If your windshield washer system is no longer working properly, the entire system should be checked as the pump is not necessarily the fault. Start by checking windshield washer pump fuse thanks to the control lamp.
Ground it by attaching the clamp to a metal surface of the vehicle. Then ask someone to use the windshield washer handle. If the lamp lights up, the fuse is good. Test the pump itself by turning the washing machine back on while keeping one hand on the tank.
If you hear the pump running, check:
- That there is no leakage under the car;
- The hose from the pump to the nozzles is not kinked.
Then, clear the pipe with clean water and clean the nozzles to make sure they are not blocked. If, after doing this, your windshield washer system still does not work, despite a full tank, this means that the pump itself is clogged: it will either have to be repaired or replaced.
👨🔧 How to change the windshield washer pump?
If your windshield washer system is not working, check for a defective washer pump fuse. Also check that the problem is not a clogged nozzle or a clogged hose. After determining that the problem is in the windshield washer pump, you can replace it by disassembling the old one.
Material:
- Windshield washer fluid
- Windshield washer pump
- Tools
Step 1. Access to the windshield washer pump.
With the vehicle on the ground, remove the nuts on the front right wheel. Then raise the machine with a jack and remove the wheel. Open the hood of the car and locate the washer pump. It is located at the bottom of the washer fluid reservoir, connected by a tube to the nozzles.
Step 2: Disassemble the washer pump.
To remove the washer pump, first remove the connector and the hose that connects it to the reservoir. Then unscrew the fastening screws of the pump and the washer fluid reservoir. Disconnect the electrical wires and cover the wire with tape to prevent short circuits. Then you can remove the pump from the housing.
Step 3. Install a new washer pump.
Install the new washer pump in its place, then disconnect the electrical wires, connector and hose from the reservoir. Then tighten the pump and tank screws. Add windshield washer fluid, then reassemble the wheel and remove the vehicle to check if the windshield washer system is working properly.
💶 How much does a windshield washer pump cost?
The price of a windshield washer pump depends on the model that needs to be compatible with your car. Count from From 10 to 30 € roughly buy a new pump. To be replaced by a professional, you must add a pay rate that varies from garage to garage.
The price of replacing a windshield washer pump ranges from about From 70 to 100 € depending on the cost of labor and the price of the part.
Now you know everything about the windshield washer pump! As you already understood, the failure of this part causes a malfunction of the windshield washer system: after that it is necessary to replace it so that you can clean the car again. windshield... However, make sure it is at fault.
