P0795 Malfunction of the electrical circuit of the automatic transmission pressure control solenoid valve āCā
Content
P0795 ā OBD-II Trouble Code Technical Description
The P0795 code indicates that the PCM has detected a problem with the pressure control solenoid valve or the solenoid valve circuit.
What does the fault code mean P0795?
Trouble code P0795 indicates a problem with the pressure control solenoid valve or its circuit in the automatic transmission system. This valve regulates the hydraulic pressure required for gear shifting and normal operation of the torque converter in the transmission. The PCM determines the pressure required to shift gears based on vehicle speed, engine speed, engine load, and throttle position. If the actual fluid pressure reading does not match the required value, a P0795 code will appear and the Check Engine Light will illuminate. It should be noted that in some cars this indicator does not light up immediately, but only after this error has been detected multiple times.
Possible reasons
Possible reasons for DTC P0795 may include the following:
- Pressure control solenoid valve malfunction: The valve itself may be damaged or malfunctioning, resulting in under or over pressure in the transmission system.
- Problems with the electrical circuit of the valve: Opens, short circuits or incorrect connections in the valve electrical circuit may cause the valve to operate insufficiently or incorrectly, causing an error to occur.
- Malfunctions in the PCM: Problems with the engine control module (PCM), which controls the operation of the pressure control valve, can also cause the P0795 code.
- Problems with sensors or pressure sensors: If the sensors measuring system pressure or their circuits have problems, this can result in incorrect signals, which are then processed by the PCM, causing an error to occur.
- Incorrect valve installation or calibration: In some cases, the problem may be due to improper installation or calibration of the automatic transmission pressure control valve.
- Problems with the automatic transmission hydraulic system: Leaks, clogs or other problems in the automatic transmission hydraulic system can also cause P0795.
These are just some of the possible causes, and to accurately determine the cause, it is necessary to conduct a more in-depth diagnosis of the automatic transmission system using the appropriate equipment and tools.
What are the symptoms of a fault code? P0795?
With DTC P0795, you may experience the following symptoms:
- Gear shifting problems: The vehicle may experience delays when shifting gears or shift into incorrect gears.
- Loss of productivity: Vehicle performance and acceleration may be reduced due to improper transmission control.
- Increased fuel consumption: Incorrect gear shifting may result in increased fuel consumption due to inefficient engine operation.
- Turning on the Check Engine Light: When the P0795 code appears, the Check Engine light on the vehicle's dashboard will turn on.
- Unstable transmission operation: Unusual sounds, vibrations, or other abnormalities in the transmission may occur.
- Emergency mode: In some cases, the vehicle may go into limp mode to protect the engine and transmission from further damage.
These symptoms may occur to varying degrees depending on the specific problem in the transmission control system.
How to diagnose a fault code P0795?
The following approach is recommended to diagnose DTC P0795:
- Reading fault codes: Use a diagnostic scanner to read trouble codes in the engine management system. Verify that code P0795 is present and make a note of other codes if they are also displayed.
- Checking electrical connections: Check the condition of the electrical connections and wires associated with the pressure control solenoid valve. Make sure connections are secure and not damaged.
- Checking the Pressure Control Valve: Check the solenoid valve itself for damage or malfunction. The valve may need to be removed for more detailed inspection or testing.
- Signal and Voltage Testing: Use a multimeter to check the signals and voltages at the solenoid valve. This will determine if the valve is operating correctly and is receiving the required electrical power.
- Diagnostics of the automatic transmission hydraulic system: Check the automatic transmission hydraulic system for leaks, blockages, or other problems that may affect the operation of the pressure control valve.
- Check PCM: If necessary, check the condition of the engine control module (PCM) and its software. Problems with the PCM can also result in a P0795 code.
- Real world testing: After diagnostics are completed, it is recommended that you test drive the vehicle to check the operation of the transmission and ensure that the problem has been successfully resolved.
If you are unsure of your skills or experience with automotive systems, it is recommended that you contact a professional auto mechanic or service center to diagnose and repair the problem.
Diagnostic errors
When diagnosing DTC P0795, the following errors may occur:
- Restriction on Electrical Tests: Some technicians may only check electrical connections and components and skip checking the automatic transmission's hydraulic system, which can lead to undiagnosed problems.
- Replacement of components without additional diagnostics: Mechanics may jump right into replacing the pressure control solenoid valve without deeper diagnostics, which may be unnecessary if the problem is related to other factors.
- Insufficient PCM check: Sometimes the problem may be with the engine control module (PCM) itself, and its operation and software should also be checked.
- Insufficient hydraulic system check: Problems with the automatic transmission hydraulic system, such as leaks or blockages, may be missed during diagnosis, resulting in a malfunction after replacing the pressure control valve.
- Ignoring other fault codes: Sometimes other trouble codes can affect the transmission system and cause P0795 to appear, but they may be undiagnosed or ignored.
- Misinterpretation of symptoms: Some symptoms may be misinterpreted as problems with the pressure control valve, when the root of the problem may be in other components of the transmission system.
To avoid these errors, it is important to carry out a complete and systematic diagnosis, taking into account all possible causes and factors affecting the operation of the automatic transmission system.
How serious is the fault code? P0795?
Trouble code P0795 indicates a problem with the automatic transmission pressure control solenoid valve. Although the P0795 code itself is not critical or alarming, if it goes unaddressed, it can cause serious consequences to your vehicle's transmission and engine.
Incorrect pressure in the automatic transmission system can lead to problems with shifting gears, which in turn can lead to wear and damage to the transmission. In addition, incorrect pressure can place additional stress on the engine and other vehicle systems, which can lead to additional problems and increased fuel consumption.
Overall, although the P0795 code is not critical in the sense that it does not indicate an immediate danger to the safety or operation of the engine, it does indicate a problem that should be addressed as soon as possible to avoid further damage and costly repairs.
What repair will help eliminate the code? P0795?
Troubleshooting DTC P0795 typically involves the following steps:
- Checking electrical connections and wiring: Check the electrical connections and wiring associated with the pressure control solenoid valve. Make sure all connections are secure and the wires are intact and not damaged.
- Checking and replacing the pressure control solenoid valve: If the solenoid valve is faulty, it must be replaced. Make sure the new valve is compatible with your vehicle and is installed correctly.
- Diagnostics of the automatic transmission hydraulic system: Check the automatic transmission hydraulic system for leaks, blockages, or other problems that could cause incorrect system pressure.
- Checking and reprogramming the PCM: In some cases, the problem may be with the engine control module (PCM) and may need to be reprogrammed or replaced.
- Real world testing: After repair work is carried out, it is recommended to test drive the vehicle to check the operation of the transmission and ensure that the problem has been successfully fixed.
These steps will help eliminate the causes of the P0795 trouble code and restore normal transmission operation. If you are unsure of your skills or experience, it is recommended that you contact a professional auto mechanic or service center for repair work.
P0795 ā Brand-specific information
The specific interpretation of the P0795 trouble code may vary depending on the vehicle manufacturer? decoding the P0795 code for some popular car brands:
- Ford, Lincoln, Mercury: Pressure control solenoid valve C - high resistance / short circuit.
- Chevrolet, GMC, Cadillac, Buick: Pressure control solenoid C is faulty.
- Toyota, Lexus, Scion: Pressure control solenoid C is faulty.
- Honda Acura: Pressure control solenoid valve C - high resistance / short circuit.
- Volkswagen, Audi, BMW, Mercedes-Benz: Pressure control solenoid valve 2 - low signal / open circuit.
- Subaru, Mazda, Hyundai, Kia: Pressure control solenoid C is faulty.
- Nissan, Infiniti: Pressure control solenoid valve C - open circuit.
- Chrysler, Dodge, Jeep, Ram: Pressure control solenoid valve C - short circuit or open circuit.
Please note that these are general guidelines only, and a specific model and year of vehicle may require more detailed diagnostics. If you are experiencing a problem with a P0795 code, it is recommended that you consult the official repair manuals for your specific make and model of vehicle or take it to a qualified auto mechanic for further diagnosis and repair.
