Pros and cons of Hans pneumatic nutrunners: an overview of the four best-selling models
Content
The high torque makes this tool suitable for repair work on heavy vehicles, trucks and agricultural machinery. The all-metal housing serves as a heat sink and at the same time provides protection from destructive influences.
To increase the productivity and speed of work in tire shops, it is advisable to replace the force-generating hand tool with a Hans nut driver.
Pneumatic nutrunners Hans: How to choose and buy for tire fitting
Compressed air tool is convenient for use in workshops that repair and rearrange car wheels. The performance and efficiency of its operation is provided by a common source of energy with the tire filler.
Choosing the right Hans pneumatic impact wrench depends on the amount of torque that may be required when working with threaded fasteners.
Excessive headroom increases the weight and price of the tool, as well as the volume of air consumed from the compressor.
Advantages and disadvantages of Hans pneumatic nutrunners
Compared to devices of similar functionality powered by electrical sources, pneumatics has:
- high specific power;
- less weight;
- fire and electrical safety.
Among the shortcomings, it should be noted:
- the need for an air hose;
- compressor capacity must be higher than required by the tool (due to losses in the pneumatic hose).
An overview of the most popular Hans nutrunners
For the convenience of work, the manufacturer has developed a line of pneumatic products of various capacities and performance.
Pneumatic impact wrench Hans 1/2″ 84111
This is a productive device for working with the installation and removal of threaded fasteners. Tightening the nuts and loosening them takes 2-3 seconds. The chuck retainer ensures a tight grip of the socket heads and their quick replacement.
His 1/2 84111
Technical characteristics of the Hans 84111 wrench are shown in the table:
| Parameter | Value | |
| Torque, Nm | Minimum | 814 |
| Maximum | 325 | |
| Air consumption | 0,12 m ³ | |
| Shaft speed | 7000 / min | |
| Pneumatic hose fitting size | ¼ ” | |
| Minimum air hose diameter | 3 / 8 " | |
| Pressure | 6,2 бар | |
| Cartridge format | ½ " | |
| Product weight | 3,1 kg | |
Suitable for use in service centers and car repair shops for servicing passenger cars.
Impact wrench Hans 1″ 88111
A powerful tool for servicing heavy equipment in a production environment. The double hammer mechanism provides increased impact, and the extended spindle is convenient for working in hard-to-reach places.
His 1 88111
The table illustrates the technical data of the product:
| Parameter | Value | |
| Air supply indicators | Pressure | 6,2 бар |
| Consumption | 0,43 m ³ | |
| Torque, max. | 3388 Nm | |
| Head square size | 1 in. | |
| air inlet | 1/2 " | |
| Compressor line diameter | 3 / 4 " | |
| Spindle speed | 3500 / min | |
| Weight | 16,8 kg | |
Impact wrench Hans 1″ 88116
The high torque makes this tool suitable for repair work on heavy vehicles, trucks and agricultural machinery. The all-metal housing serves as a heat sink and at the same time provides protection from destructive influences.
His 1 88116
The table shows the characteristics of the tool:
| Parameter | value | |
| Air supply indicators | Pressure | 6,2 бар |
| Consumption | 0,255 m ³ | |
| Torque, max. | 2712 Nm | |
| Air hose fitting size | 1 / 2 " | |
| Socket chuck format | 1 " | |
| Minimum pneumatic line diameter | 3 / 4 " | |
| Shaft speed | 5000 / min | |
| Product weight | 9,17 kg | |
Pneumatic impact wrench Hans 1/2″ 84116
The high-speed tool is suitable for use in car workshops and service centers. Small size and light weight make this model popular.
His 1/2 84116
The table summarizes the main technical characteristics that the pneumatic wrench 84116 Hans has:
| Parameter | value | |
| Pneumatic system | Air consumption | 0,11 m³/min |
| Pressure | 6,2 atm | |
| Head chuck size | 1 / 2 in. | |
| Shaft speed | 8000 / min | |
| Torque, max | 814 Nm | |
| Minimum air hose diameter | 3 / 8 " | |
| Landing nipple format | 1 / 4 " | |
| Weight | 2,9 kg | |
For tire fitting, the 84116 Hans wrench will be the best choice.
