Motorcycle Device

Loading this motorcycle onto a pickup truck ends in an accident.

Cross-country and enduro practice obliges motorcyclists to be equipped with adapted vehicles in order to be able to use their two wheels in the forest or on the ground. Indeed, these motorcycles are rarely allowed on the road. Then some bikers decide to invest in a pickup truck to easily load the motocross into a trash can. But you will see that everything does not always go according to plan ...

Load the motorcycle into the back of a pickup truck.

The dump truck, located at the back of the pickups, can accommodate one or two motorcycles, depending on size. To charge the motorcycle, he just put on suitable ramps and push the bike... It is highly recommended that two people are present for this operation to be successful and above all to prevent the motorcycle from falling. Indeed, cross and enduro bikes weigh heavier.

This biker can't handle the climb and his bike hits the rear window.

After several unsuccessful attempts to assemble the motorcycle alone, pushing it by hand on ramps, this biker becomes impatient and decides to use a more radical method... No, he doesn't think of pushing it with his hand while simultaneously pressing the accelerator pedal to make it easier to lift ... He wants to get on the bike and drive it into the trash can.

He starts the bike and revs up to make it easier for him to sit down because the grass is wet. But I reached the level of the ramps, it doesn't go does not cope with the change in grip of the rear tires at all which will go from the wet grass to the ramp.

Surprised by the regained traction and easier acceleration, the bike bounces, falls back into the bucket and hits the rear window of a pickup truck !

A good player, in spite of everything, the biker, who was thrown off the motorcycle during this time, shouts "Done!"

Add a comment