SMT2 additive in automatic transmission - mechanism of action, application, feedback from car owners

CMT2 creates a film on the rubbing elements of the motor. She has good bearing capacity, allowing to increase the power of the mechanism. The protective layer prevents scuffing.

Additive SMT2 serves for additional protection of rubbing parts of the car. Usually the product is used in addition to oil, but the creators claim that this is an independent tool with a set of useful functions.

What represents

The manufacturer of SMT2 is the American company Hi-Gear. Previously, motorists used a different type of auto chemical goods - SMT.

The additive reduces the friction of engine parts and the wear process, prevents scuffing at the interfaces of metal parts.

Mechanism of action

CMT2 creates a film on the rubbing elements of the motor. She has good bearing capacity, allowing to increase the power of the mechanism. The protective layer prevents scuffing.

Mechanism of action of SMT2 additive

The effectiveness of the additive is noticeable only on whole parts. It makes no sense to try to fix breakdowns by pouring liquid into the engine.

Engine oil additive

SMT2 can be mixed with any substance in this category. The product is suitable even for resource saving formulations (SAE 0W-20) and special fluids. The tool does not change the original properties of oils.

Manual Transmission

After pouring the CMT additive into manual and automatic transmissions, users noticed that the box starts to work smoother than before. Reverse gear shifts with ease.

Particularly noteworthy are changes in the gear shifting of the transmission at low speed, when it is necessary, due to an obstacle on the road, to shift sharply from the second to the first, but the speed is still high. The operation goes very smoothly.

Instructions for use

It is advisable to fill the smt2 air conditioner after changing the lubricants into the compartment for the same materials. If grease or two-stroke oil is used, then you need to mix the compounds, and then pour.

Instructions for use

SMT does not contain solid particles and therefore does not need to be shaken before use. It is important to consider the proportions of the fill:

See also: Additive in automatic transmission against kicks: features and rating of the best manufacturers

• for the motor for the first time, 60 ml is enough. per 1 liter oils, then the dosage is halved (the film remains even after one pour);
• transmission gearbox and power steering - 50 ml. per 1 liter oils;
• garden equipment - no more than 30 ml;
• four-stroke engine - 20 ml. per 100 l. liquids;
• units with bearings - a ratio of 3 to 100.

Busting the product will degrade the performance of the systems, the parts function with emphasis.

Reviews

Studying the opinions of car owners, we can conclude that many are satisfied with the additive. They note smooth running when using liquid for more than 100 thousand km. run. However, it is indicated that before CMT2 was thicker.

There are also those who are dissatisfied - they say that only the first 200-300 km are better from the train.

SMT2 test on a friction machine