Engine Flush LIQUI MOLY Engine Flush
Auto repair

Engine Flush LIQUI MOLY Engine Flush

With an increase in engine oil consumption or a change in its manufacturer, as well as for preventive purposes, it is recommended to flush the engine with special flushes. Flushing with LIQUI MOLY for 5 minutes will do this quickly under normal driving conditions.

The manufacturer LIQUI MOLY has existed for a long time, managed to establish itself on the positive side. All products are made in Germany, have high quality and good reviews in the app.

Engine Flush LIQUI MOLY Engine Flush

Description

Flushing liquid Moth 5 minutes is used for prevention at the next oil change. This does not require special preparation of the car. The wash is poured into the old engine oil. The car operates in normal driving mode without increased load and without jamming.

The product is based on detergents, dispersants dissolved in a special liquid. Effectively removes varnish, oil deposits, sludge.

When using a liquid, the engine resource increases, the properties of engine oil are more fully manifested.

<font><font>Materials</font></font>

Five-Minute Liquid Moli is easy to use and has simple instructions. Regular use increases the reliability and service life of the engine.

The agent has a deterrent effect, does not clog the oil receiver, air ducts, oil channels of the system.

  1. Contains substances that care for rubber parts.
  2. After cleaning, it forms a protective layer that helps to reduce the friction of parts.
  3. Completely merges with all contaminants and old oil.
  4. Suitable for use in all engines running on gasoline or diesel fuel.
  5. Fully compatible with catalysts.
  6. Helps extend engine oil life.
  7. Reduces the amount of indelible residue.
  8. Does not damage gaskets and seals in the engine.
  9. Unlike long washes, it does less harm to the environment.

article 1920

Technical specifications

 

Basisadditives/carrier fluid
Colorbrown
Density at 20 ° C0,82 g / cm3
Flash point60 ° C
congelation point- 45°С

Application area

LIQUI MOLY 1920 is compatible with all petrol and diesel engines. Depending on the degree of soiling, the frequency of necessary washings is regulated.

IT IS IMPORTANT!

The product must not be used in motorcycle engines with wet clutches.

Engine Flush LIQUI MOLY Engine Flush

Application

Five Minute has a simple app:

  1. The agent is poured at the rate of 300 ml per 5 liters of engine oil.
  2. The engine starts and is allowed to idle for 10 minutes.
  3. The contents of the system are completely drained, the filter is replaced and new oil is poured.

ATTENTION!

Do not drive while washing! It is allowed to operate the car after washing and changing the oil.

Add a comment