C2021 Mercedes error code 211 Chassis
Popular questions and answers on the operation, repair and selection of a car: error 5350 Mercedes 211 address and contacts active user common causes of malfunction symptoms
Please tell me, the beetle caught fire, after the trip, drove, gave out something about the left rear valve. The error is something about disconnection, more or less. Good thing I didn't write this.
The machine is normally operated in manual mode. But here it is, after the trip the car does not line up. Those. I understand that the valve does not open to relieve pressure.
Please tell me where to find this connector on the w211, rear left, and this valve ?!
valves are located on racks and cylinders.
other advisers: don't count, go learn manuals.
valves are located on racks and cylinders.
other advisers: don't count, go learn manuals.
Troubleshooting DTC P201C: interpretation, causes, reset
- Number of diagnostic trouble codes
- Diagnostic Trouble Codes
- Error Codes for Freeze Frame Data
- freeze frame data
- Test data for lambda probes
- Status of system monitoring tests
- On-board monitoring of test results
- Distance traveled with MIL included
- Number of warm-up cycles since DTC cleared
- Distance traveled since DTC cleared
- Engine run time (minutes) with MIL enabled
- Time since DTC cleared
- injection correction data
5350 error Mercedes pressure reducing valve The steel is perfectly painted from the factory, however, due to age, there are flaws in the outer panels and rust in hidden places, even on copies that have not been in accidents. True, the body is not galvanized, so if the paint is damaged, corrosion processes will immediately begin.
What to do?
If your Mercedes-Benz Gateway fails and does not communicate with other ECUs, it must be replaced. You can try to erase the terminals on the main gateway module, but this is rarely successful.
Which gasoline is cheaper? A92A95
A new CGW module can be purchased from your dealer or online. It is important that you receive a properly coded CGW module with the Star Diagnostic scanner. The Star Diagnostic Scanner must have a subscription to complete online coding.
If you just replace the failed CGW with a new one, you will have systems that won't work because they won't be hardcoded into the CGW module.
The CGW/ZGW gateway control module stores the vehicle service history, VIN and vehicle mileage. You will need to encode the original miles and VIN into the new ZGW module by cloning the information from your old Mercedes ZGW control module. If the ZGW data cannot be read, a Mercedes dealer or mechanic can do the coding manually.
For example, power seats may not work because they are not coded in the new CGW module. The keyless entry may not work because it must be coded in the CGW module. It is necessary to code the CGW module and indicate which modules and systems are installed on this vehicle.
