Lubricant from the concern LIQUI MOLY
Content
Wheel bearings are one of the key elements of the vehicle chassis system. They must always be in perfect condition.
Due to the high loads and the effect of friction, they must be constantly lubricated with special greases.
Lubricant from the manufacturer LIQUI MOLY will help reduce friction and increase the life of walker parts.
For all the years of work in the market of fuels and lubricants, this company has earned the trust of customers with products of exceptionally high quality.
To date, LIQUI MOLY LM 50 Litho HT Grease is one of the leading manufacturers of lubricants for mechanisms, which is confirmed by positive consumer recommendations.
Lubricant LIQUI MOLY LM 50 Litho HT: description
LM50 is a category 2 lubricant according to the National Lubricating Grease Institute.
It fully complies with all the quality requirements of this institute, that is, it is resistant to oxidation, evaporation and softening.
This LIQUI grease is the most versatile: it can be used for both permanent lubrication of rotating joints and initial lubrication.
Protection against corrosion processes and moisture is one of the main useful properties that LIQUI MOLY has under the brand name LM 50 Litho HT.
With an operating temperature range of -30/+160 degrees Celsius, LIQUI MOLY LM 50 Litho HT reduces wear and pressure loads.
Properties LIQUI MOLY LM 50 Litho HT
LIQUI MOLY LM 50 Litho HT has the following properties:
- Eliminates microvibrations, reduces friction.
- Lubricates parts well.
- Protects contact surfaces from corrosion.
- Stable at negative and positive temperatures.
- Independence from the influence of the external environment.
- Stable at high pressures and loads.
- Does not lose working properties when hot and cold water enters.
- Dark blue color for easy identification of application areas.
- Does not change consistency when overheated, poor fluidity.
- Maintains high performance of all systems throughout the entire period of use.
The quality of LIQUI MOLY LM 50 Litho HT is determined by the DIN51502 KP2 P-30 standard.
Technical specifications
| Tone | blue | — |
|---|---|---|
| Viscous base | lithium complex | — |
| Operating temperature range | -30 ° C / + 160 ° C short-term +200°C | — |
| Insert | 246 ° C | Standard ISO 2592 |
| Freezes | -24 ° C | Standard ISO 3016 |
| Category by NLGI | two | DIN51818 |
| friction index | 275-290 1/10 mm | DIN51804 |
| Fall threshold | 290 ° C | Standard ISO 2176 |
| Pressure between parts at -30°C | DIN51805 | |
| Base oil separation | 0,8% | DIN51817 |
| Base oil separation | 2,7% | DIN51817 |
| EMCOR-tes | 0/0 /no corrosion/ | DIN51802 |
| Corrosion degree of copper24h 100°C | 1 B | DIN51811 |
| Vulnerability to moisture | 1-90 | DIN51807T1 |
| Base viscosity at +40 °C | 150 mm2 / s | DIN51562 |
| Basic viscosity grade at +100 °C | 13mm2/s | — |
Areas of application Litho HT from LIQUI
LIQUI MOLY LM 50 Litho HT can be used in cars, trucks and industrial equipment.
Application of the product from LIQUI MOLY
- First of all, you need to disassemble the repaired module and clean it from possible deposits of dirt and corrosion. Be sure to remove any old grease.
- Allow the mating surfaces to dry, then gently apply lubricant.
- Excess fat must be removed from the piece.
- Now we assemble and install the repaired module in place.
As you can see, LIQUI MOLY LM 50 Litho HT is quite easy to use, and such care does not require much effort.
Release form and article numbers LIQUI MOLY LM 50 Litho HT
High-temperature grease for bearing hubs LM 50 Litho HT is marked as follows:
- marker 3406/7569, package 400 grams;
- marker 3407, package 1 kg;
- marker 3400, package 5 kg;
- marker 3405, packing 25kg.
Video
