Tips for preparing your car before painting
Painting a car is time consuming and requires painstaking work, if it is not done correctly then the job will most likely look bad and the car will look even worse. It is very important to properly prepare the car so that the paint is flawless.
We have always mentioned the importance of taking care of your car in every possible way. No doubt, the paint is one of the important parts of your car, if the car doesn't have good paint, its appearance will be poor and the car will lose its value.
Typically these jobs painting we leave them in their care bodywork and paint specialists with all the necessary equipment and experience to paint a car. However, the cost of painting a car is very high, so some owners decide to take care of it themselves.
While painting a car isn't easy, it's not impossible either, and you can do a good job if you have a clean and spacious workspace, the right tools, and prepared everything you need to prep your car. .
Do not forget that before painting a car, There is nothing more important than preparing your car well before painting.
Therefore, here we have put together some tips on how to prepare your car before painting.
1.- Disarm
Don't forget to remove the parts that won't be painted, the ones that are removable like decorations, emblems, etc. Yes, you can tape and paper over them, but you run the risk of having tape on the car.
Take the time to remove these elements before painting so your final product looks its best.
2.- Sand
Grinding is an important process that you have to do a lot. You must be patient if you want to get great results.
Sand the flat surface with a DA grinder, then sand curved and uneven surfaces by hand. It is best to sand and remove old paint, even from bare metal. You will likely find rust and this is one of the things you may have to deal with when sanding, but leaving rust on will only ruin your paint job, it won't go away and will continue to eat away at the metal.
3.- Prepare the surface
It doesn't matter if your paint is new, as long as you don't repair the surface and small bumps, the new paint will show it all.
4.- First
Applying a primer is necessary when preparing a car for painting. The primer acts as a link between the bare metal surface and the paint on it.
When painting a car without a primer, the bare metal surface will peel off the paint and eventually rust quickly. Usually 2-3 coats of primer are required before painting. Make sure the primer and paint are compatible with each other.
