Technical description Ford Focus I
Content
Ford Focus is another model from the new Ford line, the design and exterior have been completely changed. Like Ka or puma, many curves appeared, the whole body line, the shape and location of the lamps changed. The car has become more modern. The premiere of the model took place in 1998 and to this day it is one of the most popular cars in its class. We can meet 4 body versions of the focus, a three-door and five-door hatchback, as well as a sedan and station wagon. The floor slab is brand new, but the suspension is the same as the Mondeo. Two airbags and seat belts with pretensioners were installed as standard. The most common engines are 1400 cc petrol engines. cm, 1600 cu. cm, 1800 cu. cm and 2000 cu. See also economical diesel engines.
TECHNICAL ASSESSMENT
Cars attract attention with large headlights and lanterns
rear. Characteristic connection wheel arches with bumpers. Whole
very impressive looking car, details taken care of. All
the elements are perfectly matched to each other, the body is quiet and well soundproofed. Although the cars are already old from the beginning of production, their appearance is still there.
external is not much different from the new, perfectly fixed
focus is highly recommended against corrosion. Significant mileage is
make a bigger impression on the car (Photo 1). The suspension is there
Perfectly coordinated, yet delicate enough, yet ensures driving comfort.
Photo 1 |
TYPICAL FAULTS
Steering system
Serious malfunctions were not observed, the only common
replaceable part - the end of the rod (photo 2).
Photo 2 |
Transmission
The gearbox provides a very comfortable gear shift. he doesn't look
typical malfunctions of the main components of the gearbox, however, they are common
semi-axle seals were replaced (Photo 3,4).
Clutch
Apart from normal wear of parts, no faults were observed. With very
high mileage, loud work going on.
ENGINE
Well-chosen and matched drives can do a lot
kilometers without repair of the main units, however, in engines
gasoline, leaks appear quite often with high mileage
in the area of the shaft seal at the pulley (Photo 5,6). There may also be problems with the lambda probe i
flow meter (Photo 7). Items are also often replaced
executive, such as sensors. Also worth mentioning is the hack
flexible connection of the exhaust system (Photo 8) and
corrosion joints of individual elements of the system (Photo 9).
Hamulce
Serious malfunctions characteristic of the model were not observed,
however, it should be mentioned that the brake cable bits repeatedly
manual (Photo 10) and corrosive metal wires in the area of the rear beam.
Photo 10 |
Body
Impeccable workmanship and good corrosion protection ensure
that no corrosion centers are observed if not done carelessly
body and paint repairs. The only drawback is caustic
elements of the front shield lock (photo 11,12,).
Electrical installation
Installation does not present any special problems, except for the failure of the fuel pump.
especially in LPG models where users regularly
forget about the need to refuel, which causes the pump to work
often dry, causing it to seize and force replacement (Photo 13).
Photo 13 |
Suspension
The high-precision suspension also provides good traction.
driving comfort, however elements are particularly prone to knocking
stabilizer connectors (Photo 14) and rubber elements are often replaced
stabilizer (Photo 15), metal-rubber bushings in the suspension
front and back (Fig. 16.17,18). The rear beam adjustment eccentric sticks (Photo 19,20, 21), sometimes the suspension spring breaks (Photo).
interior
Made aesthetically and functionally. Lack of three and
The five-door has little space for rear seats.
the case is in the sloping roof line (Photo 22). There are no objections after you
as for the interior. Airflow controls may break.
and failure of steering column switches.
Photo 22 |
SUMMARY
Very good design due to various body options.
Everyone will find a model tailored to their needs. elegant line
body makes the car very popular. Spare parts are
available immediately, and a wide choice of replacements affects the low
part price. The machine is relatively low-failure, and therefore cheap
operation. Taking care of the components will ensure a long life
self-propelled.
PROS
– Attractive appearance
– Comfortable and functional interior
– Reliable engines and gearboxes
– Good availability of substitutes and affordable price
– Low bounce rate
MINUSS
– Delicate pendant
– corrosion resistant exhaust system
– Clogged handbrake components
– Insufficient roof space for rear seats
Availability of spare parts:
The originals are very good.
Substitutions are very good.
Spare parts prices:
Originals are expensive.
Substitutes - at a decent level.
Bounce rate:
average