Top 6 most powerful automotive compressors 2021: model characteristics, photos and reviews
Content
A good universal pump provides a pressure increase to normal even for a small truck in a few minutes due to the use of a two-piston supercharger circuit.
A powerful, high-quality car compressor should be able to inflate a set of wheels in one go, without stopping and triggering the overheating protection.
6th place - car compressor AVS KS750D
Two-piston, in an all-metal case. The symmetrical arrangement of the compression chambers closed with ribbed heat-removing caps ensures the stability of the device during operation. The plastic framing of the ends rests on four vibration-absorbing legs and contains the units for electrical switching and emergency shutdown in case of overheating. The expandable air hose is equipped with a quick-release clamp on the compressor side. For connection to the busbar, a threaded fitting with a control pressure gauge is used.
Technical specifications | The values |
Maximum performance | 75 l / min |
Supply voltage | 12 Volts |
Current consumption | 25 amp |
Developed inlet pressure | 10 бар |
Electrical cord | 3 m with alligator clips |
air hose | 5 m |
Weight | 3,2 kg |
5th place - car compressor "Agressor" AGR-160
Single-piston blower connected directly to the battery with alligator connectors. A powerful electric motor is placed in a metal casing with slots that improve heat dissipation. The stamped steel platform on four vibration-absorbing legs provides stability during the work.
A fitting with a terminal for connecting a quick-clamp connector of an expandable air hose is combined with a stationary handle. The compression unit is placed in a heat-removing metal case. There is protection against overheating.
Technical conditions | Value |
Voltage | In 12 |
Current | A 45 |
Maximum pressure | 10 бар |
Productivity | 160 l / min |
Air hose length | 8 m |
Electrical cable | 2,4 m |
The weight | 9,1 kg |
The package includes a transport bag, a set of adapters for working with household inflatable products and sports equipment, as well as an air filter. When pumping up a set of wheels with a powerful car compressor, it is advisable to start the engine to maintain a voltage of 12 volts due to the large current consumed from the battery.
4th place — compressor "MayakAvto" AC 1500ma 2-piston increased power
Good all purpose pump. Provides an increase in pressure to normal even in a small truck in a few minutes due to the use of a two-piston supercharger circuit. Encased in a metal case, the powerful electric motor is powered directly from the battery to increase current. A fuse is built into the connecting cable.
Die-cast aluminum housings of the compression chambers are equipped with fins that effectively dissipate heat. Both air intakes are equipped with filters. A sturdy metal platform on four rubber feet provides stability during operation and isolates the device from dirt when placed on an unprepared surface. The air hose is spring-loaded, of variable length, equipped with a quick-clamp connector for mating with the compressor. A threaded plug with pressure gauge and deflator valve is screwed onto the tire nipple. The power of a car compressor and the energy consumed are quite high compared to its modest dimensions.
Parameters | The values |
Maximum inlet pressure | 10 atm |
Performance | 300 l / min |
Power, max. | 1,5 l. with. (approx. 1 kW) |
Supply voltage | 12 Volts |
Power cable length | 3 m |
air hose | 5 m |
Working time without interruption | 20 minutes |
3rd place — car compressor MegaPower M-53600
The device is made completely in a metal case with a plastic cap placed at the end, covering the electrical communication units and the overheating shutdown relay. Connection to the on-board electrical network with crocodile connectors directly to the battery. The expandable inflating hose connects to the air terminal connector combined with the carrying handle via a quick-release connector.
The connection to the tire is threaded, for pressure control a dial gauge is built in nearby, calibrated in kg / cm2 and pounds per inch. A powerful 12 volt car compressor is placed on a metal platform, which provides stability and protection from dirt on the body.
Technical operating conditions | value |
Voltage | In 12 |
Power | 600 watts |
Pump performance | 160 l / min |
Maximum developed pressure | 10 бар |
Air hose length | 7 m |
Current consumption | A 45 |
The weight | 7 kg |
Includes a cloth transport bag and adapters for use with household inflatable equipment.
2nd place — car compressor Airline EXPERT CA-045-07
Portable single piston pump that combines low weight and good performance. The ends of the metal case of the electric motor are covered with plastic caps with cast support legs. Under one of them is a power switching device, the other has an integrated LED flashlight, which is necessary for working with the car in the garage or in the dark.
An increase in efficiency when turning on the pump and the lantern at the same time is provided by connecting directly to the battery. The air supply fitting is built directly into the compression chamber. A quick-clamping nozzle of an expandable hose is put on it, equipped with a pressure gauge near the connection with the tire nipple. There is no carrying handle.
Technical indicators | The values |
Maximum productivity | 45 l / min |
Ultimate pressure | 10 бар |
Current consumption of the device | A 25 |
On-board voltage | In 12 |
Air hose length | 5 m |
Power cable | 3 m |
Net weight | 2,8 kg |
1st place - car compressor "Agressor" AGR-8LT
The top ranking is topped by a pump with an additional air receiver. Good for large luxury jeep, SUV or medium truck. The supercharger is mounted on a metal container, in which compressed air accumulates for subsequent supply through a hose to the terminal for docking with the tire nipple.
There are two pressure gauges - one to control the pressure in the drive, the second measures it in an inflated tire. The expandable air supply tube is completely self-contained and equipped with quick-release clamps on both sides for quick change of connected devices. The carrying handle is stationary, placed on top parallel to the body and placed in a polymer case to protect against burns.
Characterization | Parameter value |
Device supply voltage | In 12 |
Maximum current consumption | A 40 |
Inlet pressure developed | 10 бар |
Performance | 72 l / min |
Receiver volume | 8 l |
air hose | 10 m |
Appliance weight | 11 kg |
The unit can be used not only as a powerful compressor for a car. To realize its potential, in addition to a gun with a pressure gauge and an air hose, it also has an adapter that connects a pneumatic tool if painting or other work is necessary.