TOP 9 compressor filters for car painting
Content
- Dehumidifier Pegas AFRL802 8 atm
- Filter Wester 816-002 10 atm, 1/4F, 1/4F
- Filter Wester 816-003 10 atm, 1/4F, 1/4F
- Oil and moisture separator PATRIOT F 100 mini
- Filter-moisture separator for compressors "Russian Master" AFR80 PM-14917
- Oil-moisture separator WIEDERKRAFT WDK-7840
- Air filter ECO AU-02-14 with pressure regulator and oil sprayer (1/4″, 1750l/min)
- Licota PAP-C207B Fine filter-moisture-oil separator 3/8″ 3-level, 0,01 micron
- Oil-moisture separator WIEDERKRAFT WDK-7730
One of the most important parameters of compressors of any kind is the working pressure. In the Chinese filter ECO AU-02-14, the air compression level does not need to be maintained manually by observing the pressure gauge. This function in the device is performed by the automation unit - the pressure regulator. It can be pumped in a compressor with an ECO AU-02-14 air filter: the maximum indicator is 15 atm, the optimal working one is up to 10 atm.
Cars are painted using compressors. Devices suck in air from the environment, compress it and give it to the pneumatic line. Uniform, without flaws, body color depends on the purity of the air at the outlet. As a protection against dust, moisture, oil, soot particles, a compressor filter for painting a car is provided in the design. A variety of cleaning elements for screw and piston devices causes confusion among buyers. According to the technical characteristics and user reviews, TOP-9 of the best components for automotive painting equipment has been compiled.
Dehumidifier Pegas AFRL802 8 atm
International standards allow an oil and oil vapor content in the air supplied to the compressor of 0,01 mg/m3, solid particles - 0,1 microns. But in the atmosphere, these figures are about four times higher. If you let dirty air into the pneumatic systems, you cannot achieve high-quality painting of a car: the surface will be covered with so-called "craters" that cannot be polished.
Removable cartridges of the Pegas AFRL802 dehumidifier collect dust, metal particles, water droplets, providing the air cleanliness allowed by the ISO 8573-1 standard.
The device is equipped with a built-in pressure gauge that shows the pressure of the air supplied to the line.
Specifications:
Brand name | Pegas |
Item type | Humidifier + lubricator |
Maximum compressor pressure | 8 atm |
Threaded connection, dimensions | 1 / 4F, 1 / 4F |
The price of the product is from 1700 rubles.
Filter Wester 816-002 10 atm, 1/4F, 1/4F
For a good spraying of paint with a gun, you need a lot of clean air - at least 200-400 liters per minute. Modern compressors are able to create the right pressure to meet such needs. But microparticles of atmospheric dirt, moisture will not allow high-quality painting of metal parts of machines.
An excellent embodiment of engineering comes to the rescue - a compressor filter for painting Wester 816-002 cars. The device effectively cleans compressed air from mineral oils, water drops, suspended particles. At the same time, it not only shows the working pressure, but also allows you to adjust according to the needs of the master.
In addition to the air filter and a gearbox with a built-in pressure gauge, the package includes a separator and equipment for supplying liquid lubricant - a lubricator.
Specifications:
Brand name | Wester |
Item type | Filter, reducer, lubricator |
Material of manufacture | Metal |
Connection | 1/4"-1/4" |
Maximum working pressure | 10 atm |
Filter price - from 2500 rubles.
Filter Wester 816-003 10 atm, 1/4F, 1/4F
The most important component of car painting equipment is the Wester 816-003 filter. If the compressed air that enters the spray gun contains dirt from the surrounding atmosphere, the painting work will be ruined.
Barrier on the way of oil products, dust, fluff, moisture - filter Wester 816-003. The device consists of a metal case and a porous bronze sleeve - a filter element. The design is easily disassembled, the reusable moisture separator is washed and installed in place.
The device kit includes:
- separator (separator of water and oil);
- reducer with built-in accurate pressure gauge;
- air filter.
Specifications:
Product type | Reducer, filter, moisture separator |
Filter | Air |
Maximum possible compressor pressure | 10 atm |
Threaded connection dimensions | 1 / 4F, 1 / 4F |
additional information | With pressure gauge |
The price of the product is from 1660 rubles.
Oil and moisture separator PATRIOT F 100 mini
The PATRIOT F 100 mini filter works in combination with a compressor and a pneumatic tool with an airbrush.
The weight of a miniature device with an oil and moisture separation function is just over 100 g. At the same time, the filter pressure on the compressor for painting a car is 8 bar. The compact device regulates pressure, is able to pass and effectively clean 700 liters of air per minute. The degree of purification is 40 microns.
High performance, standard threaded connection (1/4 inch), low price (from 370 rubles) made PATRIOT F 100 mini an indispensable assistant in painting work.
General characteristics:
Performance | 700 liters of air per minute |
Possible pressure | 8 бар |
Filtration degree | 40 microns |
Connection, thread size | 1 / 4 in. |
Filter-moisture separator for compressors "Russian Master" AFR80 PM-14917
The filtering device is located on the compressor-sprayer line. The device "Russian Master" AFR80 PM-14917 captures particles of dust, soot, mineral oils with a size of 20 microns or more. This function lies on a removable filter element made of highly porous bronze.
The compressor filter for painting a car has a valve in its design, where a pressure regulator operating in automatic mode and a pressure gauge are located. The latter shows a stable pressure in the line in two units of measurement - atmospheres and PSI.
The device was developed and produced according to the most advanced technologies. Advantages of the dehumidifier "Russian Master" AFR80 PM-14917, noted by users:
- nice design;
- ease of maintenance;
- the possibility of wall mounting in a convenient place;
- low cost - from 1300 rubles;
- high throughput - 1500 l / min.
No deficiencies found.
Key Features:
Filter Options | 20U |
Inlet size | 1 / 4 in. |
Performance | 1500 liters of air per minute |
Working pressure in the line | 10 atm, or 150 PSI |
Maximum possible pressure | 15 atm, or 220 PSI |
Oil-moisture separator WIEDERKRAFT WDK-7840
To organize the efficient operation of pneumatic tools in the painting business, the WIEDERKRAFT WDK-7840 device is used. The chamber with dimensions of 213x87x81 mm and weight of 610 g purifies the surrounding air from dust, moisture, oil compounds, and other impurities.
The WIEDERKRAFT WDK-7840 filter is used in reciprocating and rotary (screw) compressors. In these systems, when compressing air, it is necessary to supply oil and mix it with air, therefore a lubricator is provided in the installation. If at this moment the air is not cleared of moisture (the main enemy of paint):
- an emulsion is formed that will clog the pneumatic channels;
- at sub-zero temperatures, condensate will turn into ice and damage the lines;
- air ducts will rust.
The device operates at -5 °С on the thermometer and high plus values, up to 60 °С, maintaining a stable pressure of 10 atm. In one minute, the device is able to pass 3000 liters of air.
Main technical characteristics:
Replacement filter | 5 microns |
Ambient operating temperature | From -5 ° C to +60 ° C |
Maximum productivity | 3000 liters of air per minute |
Threaded connection, dimensions | 1/2" 1/2" |
Line pressure | 10 atm |
The cost of goods - from 2500 rubles.
Air filter ECO AU-02-14 with pressure regulator and oil sprayer (1/4″, 1750l/min)
A Chinese-designed unit weighing 400 g cleans the air compressed in the compressor from various mechanical contaminants larger than 20 microns. Productivity of the device in normal operating conditions - 1750 l/min. For the effective functioning of the device, a temperature from -5 ° C to +60 ° C is considered acceptable.
Air is supplied to the paint sprayer not only clean, but also enriched with oil through the built-in spray lubricator. The last one in the ECO AU-02-14 has a stand-alone design. This is an oil tank with a metal case, which is put on the inlet of pneumatic equipment, fastened with a 1/4″ threaded connection. Structurally, the atomizer is placed after the filter, where drying takes place - the separation of moisture from the air. The type of oil recommended by the manufacturer is ISO VG 32.
One of the most important parameters of compressors of any kind is the working pressure. In the Chinese filter ECO AU-02-14, the air compression level does not need to be maintained manually by observing the pressure gauge. This function in the device is performed by the automation unit - the pressure regulator. It can be pumped in a compressor with an ECO AU-02-14 air filter: the maximum indicator is 15 atm, the optimal working one is up to 10 atm.
Main technical data:
Connecting thread size | 1 / 4 in. |
Operating pressure | Up to 9,5 atm |
MAX pressure | 15 atm |
Ambient temperature | From -5 ° C to +60 ° C |
Filter material | Brass |
Performance | 1750 liters of air per minute |
Filtration degree | 20 microns |
Lubricator oil | ISOVG 32 |
The price of the goods is from 1750 rubles.
Licota PAP-C207B Fine filter-moisture-oil separator 3/8″ 3-level, 0,01 micron
The design of the filter-moisture-oil separator consists of 3 series-connected metal modules with a volume of 80 cm3 and 3/8" internal thread. The highest level of air purification before entering the pneumatic lines occurs in the products of the Likota company - 99,9%.
Compressed air passes through the adsorbing substances of all three modules, hence the high degree of purification, inaccessible to standard filters:
- the first chamber - 5 microns;
- second compartment - 0,3 microns;
- third flask - 0,01 µm.
The device weighing 2,6 kg includes an automatic pressure regulator. The moisture falling out of the air is discharged automatically: a breather is provided for this.
The filter for the compressor for car painting is protected from damage by contaminants. The threat will be signaled by pink-colored granules of the 3rd flask. The central scale-indicator in this case will turn red.
Specifications:
Size of internal threaded connection | 3 / 8 in. |
Operating pressure | Up to 9 kg/cm2 |
MAX pressure | 17 kg / cm2 |
Performance | 300 l / min |
Appliance weight | 2,605 kg |
The goods of the Likota company cost from 2500 rubles.
Oil-moisture separator WIEDERKRAFT WDK-7730
The WIEDERKRAFT WDK-7730 model works in tandem with pneumatic tools, dehumidifies and purifies the air before it enters the spray booths. Body cosmetic repairs with compressors with WDK-7730 can be done in a garage with your own hands or using professional equipment in auto repair shops, service stations.
The filter cartridge is easy to replace by disassembling the design. The WIEDERKRAFT WDK-7730 device captures particles of pollution with a size of 5 microns, but smaller fractions are optionally available - 0,3 microns, 0,01 microns.
Operating temperature range - from -5 °С to +60 °С with automatically maintained line pressure of 10 atm. The device is able to clean 1500 liters of air per minute. The filter and pressure regulator are combined in one housing, which makes the device compact and easy to use.
Specifications:
Brand name | REVITALITY |
Throughput | 1500 liters of air per minute |
Ambient operating temperature | -5 ° C- + 60 ° C |
Working pressure in pneumatic lines | 10 бар |
Threaded connection size | 3 / 8 in. |
Price WIEDERKRAFT WDK-7730 - from 3500 rubles.