Car rear bumper: TOP 8 best models
Content
The rear bumper of a car is a body element that most often suffers during parking or in an accident. Repairing a plastic part is pointless, because the cost of restoration is commensurate with buying a new one.
The rear bumper of a car is a body element that most often suffers during parking or in an accident. Repairing a plastic part is pointless, because the cost of restoration is commensurate with buying a new one.
Renault Duster
The rating of manufacturers of bumpers for cars opens a body element for the French SUV Renault Duster. The vehicle part has prepared cutouts for installing additional elements.
Renault Duster rear bumper
The spare part is supplied unpainted, the motorist must independently modify it. This is what many manufacturers of such body parts do, because getting into the tone of the car is difficult.
| Features | |
| Manufacturer | SAILING |
| SKU | L020011003 |
| Machine generation | I (2010-2015) |
| Price | 2800 rubles |
The rear bumper is mounted on the SUV with clips and screws. Holes for the latter are located at the top. There are four of them in total. Built-in fasteners are on the sides.
Mitsubishi galant
Next in the ranking is the more expensive rear bumper of the car, which is installed on the Japanese car Mitsubishi Galant. It also differs in manufacturer, now it is FPI. The body part is painted black, which also affects the cost.
Mitsubishi Galant rear bumper
There are no additional cutouts. There are no holes for rear lights, parking sensors or pipes. But in the original version of the car, these elements are not. To install them, the owner of the car will have to contact specialized services, which will increase the price of the part.
| Features | |
| Manufacturer | REIT |
| SKU | MBB126NA |
| Machine generation | IX (2008-2012), restyling |
| Price | 6100 rubles |
The bumper is attached to the Mitsubishi Galant with clips. Additional tools are hidden so that they will not be visible when opening the trunk. They are located in the landing sites of the rear blocks of lights.
The spare part is suitable for only one version of the Galant model - produced from 2008 to 2012. It was a restyling of the ninth generation. The element that is offered for the previous version of the machine cannot be installed instead.
Toyota SD Corolla
Another rear bumper of a Japanese-made car. This time, the body part for the car was produced by the Chinese company SAILING. This is an affordable non-original option that can replace an element damaged in an accident.
Rear bumper Toyota SD Corolla
The item is delivered unpainted. This allows you to reduce the cost to a minimum. A car enthusiast needs to prepare for the fact that the price will increase by 2-3 times when he turns to a body repair service. But this way you can more accurately select the shade of paint so that the new element does not stand out.
| Features | |
| Manufacturer | SAILING |
| SKU | L320308044 |
| Machine generation | E150 (2006-2010) |
| Price | 2500 rubles |
From below, the manufacturer left a blank for installing fog lights. The holes already have the right points for fixing the lights and wiring. A car enthusiast may not mount this element if he does not use it, and order plastic plugs that will hide extra cutouts.
Toyota Rav4
Another Toyota rear bumper, but this time for the RAV4 crossover. The small size is due to the large trunk lid on a Japanese car. This did not prevent the Chinese manufacturer SAILING from setting a price higher than for those products that were presented earlier.
Rear bumper Toyota Rav4
The body part is delivered unpainted. The motorist will have to apply primer and match the paint to the color of the vehicle. This will avoid the incompatibility of the shades used.
| Features | |
| Manufacturer | SAILING |
| SKU | L072011002 |
| Machine generation | KS40 (2013-2015) |
| Price | 3500 rubles |
A bumper is installed on a Toyota RAV4 (2013-2015) car using two long bolts. Holes for them are located on the right and left next to the rear fog lights. Places for the latter are also prepared by the manufacturer. It remains for the owner of the car to remove the PTF from the old body element and transfer it to a new one.
There are no other cutouts or fasteners on the bumper. The exhaust pipe on the car runs below the part, so there is no room for pipes. As well as not offered plastic pads or points for installing parking sensors.
Toyota Camry
The last in this rating is the rear bumper of the car from the Japanese manufacturer Toyota. This element is not made for a crossover, but for a sedan. Supplied unpainted. The same Chinese company SAILING is engaged in stamping of the part. But this time, the spare part looks larger and more textured, although it costs less.
The manufacturer did not paint the element, leaving it to the motorist to do so. Installation of a plastic body part is carried out using clips and long bolts. Holes for them are located on the right and left next to the lights. When the trunk lid is closed, these places are not visible.
| Features | |
| Manufacturer | SAILING |
| SKU | TYSLTACY11902 |
| Machine generation | XV50 (2011-2014) |
| Price | 3000 rubles |
There are cutouts on the bottom for installing additional lights. The texture planes fully correspond to the original ones. Plastic inserts are visible inside the bumper, with the help of which the headlights will be fixed to the car body. There are also places for laying wires.
A plastic element is installed on a Toyota Camry of the XV50 generation. The vehicle was produced in this format from 2011 to 2014. After the representatives of the Japanese brand decided to restyle the car, where the rear bumper is slightly different from the product from the rating.
Volkswagen passat
The rear bumper of the Volkswagen Passat is the first German participant in the rating. The part is made by the Chinese company SAILING. The quality of the products of this manufacturer of many motorists is not satisfied. They claim defects in fasteners and offer to use the spare part as a “temporary cape” until they can order the original.
Rear bumper Volkswagen PASSAT
But the cost for an unpainted bumper is appropriate - only 3400 rubles. An original spare part from a German company will cost a car enthusiast much more. However, the price will rise when the owner of the car decides to prime the new element and paint it. Then you will have to pay extra for the installation of parking sensors, if they were previously.
| Features | |
| Manufacturer | SAILING |
| SKU | VWL0409009 |
| Machine generation | B7 2011-2015 |
| Price | 3400 rubles |
The plastic rear bumper will only fit the B7 generation of the Passat model. It was produced from 2011 to 2015. After it was replaced by a more modern version. She leaves the conveyors of the German automobile brand so far.
There are no additional fasteners in the presented product from SAILING. The bumper is installed on the supporting structure of the car using clips. Decorative cutouts are noticeable on the sides, and right in the center there is a platform for placing a state number.
LARGUS Cross
The rear bumper of the Lada Largus Cross is the only part of the rating produced by the manufacturer. The domestic enterprise AvtoVAZ creates budget transport for daily use, and therefore spare parts for cars are cheap. The motorist does not need to look for Chinese counterparts.
Rear bumper LARGUS Cross
The product is delivered unpainted, but has all the factory embossing. Mounting on the load-bearing part of the body is carried out using clips and bolts. The latter are placed along the bottom bar of the element. There are 4 of them in total, but they are completely hidden by the trunk lid when it is closed.
| Features | |
| Manufacturer | AvtoVAZ |
| SKU | 8450009827 |
| Machine generation | Cross |
| Price | 4900 rubles |
Supplied complete with bumper and original rivets. Includes 2 pieces. The manufacturer also cut out seats for installing rear parking sensors. They are placed in three places: left, right and center.
The bumper is available only for the Cross version. This is a more sporty station wagon equipment from a domestic manufacturer. The spare part will not be installed on the standard modification.
Mercedes S-class W222
The first place in the ranking goes to the rear bumper for the Mercedes S-class W222. This is only the second German car, but the spare part for it is produced by the Russian company NEW FORM.
Rear bumper Mercedes S-class W222
The highest cost of the spare part, when compared with other participants in the rating, is due to the premium class of the car. The original body element is several times more expensive than the one presented by the team of tuners.
| Features | |
| Manufacturer | NEW FORM |
| SKU | MBW222-000009 |
| Machine generation | 6 (2013 - 2017) |
| Price | 35 rubles |
The spare part is supplied complete with all necessary stickers and rubber inserts. The indicated price also includes the trims for the muffler pipes with AMG engraving, diffuser, brackets and fasteners.
The bumper is made of ABS plastic, stainless steel nozzles. Installation is carried out in regular places, but before that the spare part needs to be finalized. The body element is supplied unpainted.
