Qashqai parking light bulb replacement
Content
| Profitability — 72% Print |
All 10, 2007, 2008, 2009, 2010, 2011 and 2012 J2013 bodies will have the same parking light replacement.
Installation is carried out from the side of the engine compartment in the block headlight. No need to disassemble the headlight.
You will need a light bulb - W5W.
The location of the marker light on the lighthouse.
1 - Play forward. 2 - High beam headlights. 3 - Front indicator. 4 - Low beam headlights
Power parameters of all lamps
Headlamp low beam (xenon, halogen type H7) 55 WHeadlight high beam (xenon, halogen type H7) 55 W Front indicator 21 W Front clearance 5 W Front fog lamp (type H8) 35 W Side turn signal repeater 5 W Rear indicator 21 W Stop sign 21 W Rear clearance 5 W Reversing light 21 W Upper brake light SignalLEDsLicense plate light5WRear fog light21WRoof lights for general interior lighting8W
Replacement
1. Open the hood and install it on the stopper.
2. Disconnect the wire from the negative terminal of the storage battery.
3. For replacement in the left block of a headlight remove an air inlet.
To replace the right headlight, you do not need to disassemble any element.
4. Now you need to remove the cartridge with the lamp, to do this, turn it clockwise and remove it from the headlight.
5. Now we will pull out the burnt out light bulb from the base.
6. Install a new one and collect everything back.
| Evaluate the usefulness of the material: |
No one has answered the poll yet, be the first.
Side lights ensure the safety of the car both when parking and while driving. They must always be in good condition. If the bulbs are burned out, do not continue to drive the vehicle, but replace the bulbs instead.
See also: pencils for drawing scratches on a car
Where is the marker lamp located, its functions
Front and rear dimensions ensure the safety of both the car and pedestrians. They light up at night when you are on the move and also stay on when the car is parked on the road or on the side of the road.
The main function of any size is to attract the attention of other drivers at night and show them the size of the car. During the day, these lighting elements are not used, as sunlight makes them dim and almost invisible.
Front position lights should be white and glow continuously at night and in conditions of poor visibility. This instruction is contained in the SDA and must be followed by all drivers without exception.
The taillights of the parking lights are also located on the same line and must be red as required.
Important! Rear dimensions, regardless of what type of lamps are installed on them, should not shine brighter than brake lights and direction indicators. And if for some reason one of the elements does not burn out, the violator can be fined.
If a malfunction is detected and the lamps burn out, the defective element must be replaced immediately. On the Web, you can find many different videos on how to replace the parking light on different Nissan Qashqai models.
On the 2011-2012 Nissan Qashqai, as on all other models, the front dimensions are located at the headlights.
Replacement Features
The marker lamp is replaced in the following sequence:
- Open the hood and lock it in this position.
- Remove the negative terminal of the battery (when changing the size on the left headlight, the air duct must also be removed).
- The cartridge with the burned-out lamp is unscrewed clockwise and removed from the headlight.
See also: tuning chevrolet cruze hatchback
On the Nissan Qashqai, the overall headlights are simple without a base, type W5W 12V.
- A new one is installed in place of the burnt out lamp.
Replacing the light bulb (requires the installation of a P21W lighting element) of the rear clearance is carried out according to the following algorithm:
- The tailgate opens and the bolts on which the headlight is attached are unscrewed.
- The latches are removed, and the headlight is pulled out towards itself.
- The latches of the base are pressed and the position lamp (above) is removed).
- A new light bulb is installed to replace the burned out one.
- Reassemble in the reverse order.
Conclusion
Changing the marker lights, both front and rear, on the Nissan Qashqai is quite simple. You can deal with this on your own, without contacting the service station. Timely replacement of these elements will help to avoid fines, as well as make night driving and parking safe.
For such a simple procedure as replacing a light bulb in the Nissan Qashqai headlights, a car service can charge at least 100 rubles. Although in reality there are almost no difficulties and even girlish hands can change a lamp the size of a Qashqai. The headlight of this car has standard W5W 12V baseless lamps (OSRAM 2825 will cost 30 rubles, and Osram 2825HCBI Cool Blue Intense 450 rubles)
With the replacement of the size lamp in the right headlight, there will be less doubt, but with the left headlight, as with the replacement of the low beam lamp, access through the air duct can be difficult. The cartridge with the lamp of the front dimension is turned counterclockwise until it clicks and is removed.
If you still have questions and difficulties when replacing the Qashqai lamp, watch the video.
Subscribe to our channel on Index.Zene
Even more useful tips in a convenient format
It seems that everything suits Qashqai, but for incomplete 4 years of operation (I have zero in my cabin), I changed the front dipped beam, dimensions and one interior lighting twice. Most importantly, I cleanse myself with ALCOHOL-halogens. They still burn like Philips, or ours, St. Petersburg (these are half the price). In the cabin, they took 1800 rubles for replacing the front size, so I set it for myself, cursing mercilessly. Who has changed himself will understand me.
