Replacing the outer CV joint and anther Nissan Qashqai

How to replace an external CV joint on a Nissan Qashqai 1.6 and 2.0 car yourself?

Replacing the outer and inner CV joint is a procedure that may be needed at any time, it is better to immediately change the part with the anther.

Also read:

What is the difference between an outer CV joint and an inner CV joint

Most often, you only need to change the boot, which is considered a consumable, but you can’t do without disassembling some parts of the car.

When to change

It is recommended that you periodically check the technical condition of your machine. To do this, sometimes look under the Nissan - with the naked eye you can see a failed anther.

To replace it, it is not necessary to go to a car repair shop and leave several thousand rubles there. It is quite realistic to determine that repairs are needed, and it is quite possible to solve the problem yourself, if there is a place and time for this.

A malfunction of the inner and outer CV joint can manifest itself in different ways. While driving, you can feel the beating of the driveshaft by looking under the car, finding spilled grease flowing from the CV joint.

If you jack up the Nissan, shake the part, you will hear a strange knock. It is also noticeable when moving. Characteristic creaking when turning.

It is recommended to periodically monitor the condition of the anthers: for example, every 10 thousand kilometers. They need to be changed if the lubricant began to crawl out into the street, mechanical damage is noticeable, the rubber has dried up.

Смазка

It is not always necessary to replace the hinge, sometimes it can simply be lubricated. Even if you only change the boot, you will still need a special grease for the grenade.

Types of lubricants for CV joints:

• Lithium;
• With molybdenum;
• Barium.

Do not use:

• Graphite grease;
• Technical vaseline;
• "Thick 158";
• Various compositions of hydrocarbons;
• Compounds based on sodium or calcium;
• Based on iron and zinc.

Replacement process

To replace the CV joint with a Nissan Qashqai, it is necessary to jack up the car on the right or left side (on the side that needs to be repaired).

Replacing the CV joint, removing and installing the transmission in place was no problem, but removing the CV joint from the transmission took two hours.

There is a retaining ring, as on many cars, and the CV joint simply jumps off the gear lever, but in my case, the ring fell into the wedge and could not lower the CV joint. I had to drink.

https://www.drive2.ru/l/497416587578441805/

• We remove the wheel, you need to knock out the cotter pin from the hub. To prevent the wheel from slipping, the brake pedal must be depressed.
• After that, unscrew the nut and bolt that serve to hold the ball joint.
• Support compact.
• After that, it will be possible to unscrew the anti-roll bar.

Check their serviceability, you need to change the racks about once every 40 thousand km.

• Do not be afraid to unscrew the tip of the rotating cam, this will not lead to a violation of the wheel alignment.
• By moving the shock absorber to the side, you can remove the axle from the axle. External damage that may be noticeable during disassembly, please immediately identify, some parts may require replacement.
• Having done the above, you can get to the anther. To get to the CV joint, you need to remove the retaining ring, remove the axle shaft.
• There is also a retaining ring on the axle shaft - we also remove it; this will remove all three teeth.

Remember the location of its sides. The product cannot be flipped to the other side.

• After removing the clamp, you can free the boot and exchange it for a new one.
• Before installing a new anther, the CV joint parts are washed in gasoline, the faulty ones are replaced with new ones.

The loop is placed in only one position (otherwise the retaining ring will not turn) and the protrusions of the anther must be between the rollers (it will not fit into the glass).

The process of work can be filmed on a photo or video, so as not to forget the sequence and make the installation correctly. Installation must be done in reverse order.

Conclusion Replacing the air springs SHRUS will not cause difficulties. If you are a fan of drive and high speeds, a broken trunk will become your constant companion on a poor-quality road.

To avoid frequent replacement on poor quality soil, you should move with caution.