Replacing the cabin filter on Nissan Qashqai
Content
Replacing the cabin filter with a Nissan Qashqai is a mandatory procedure that is recommended to be done regularly. If such work is avoided, then over time the level of stress experienced by the air conditioning system will increase significantly. However, like other consumable components, the Nissan Qashqai cabin filter is difficult to replace due to the tight fit of the parts.
When to replace the filter element
The difficulty of replacing the cabin filter with a Nissan Qashqai is partly due to the fact that the Japanese crossover was produced in several versions, in which this element is located in different places. This procedure, as advised by the manufacturer, is recommended after 25 thousand kilometers (or at every second MOT). However, these requirements are conditional.
This is explained by the fact that during the active operation of the Nissan Qashqai (especially in the city or on dirt roads), the cabin filter gets dirty faster. Therefore, when choosing when to replace components, the following “symptoms” must be considered:
- a strange smell began to come from the deflectors;
- blowing efficiency has noticeably decreased;
- flying dust appeared in the cabin.
Each of the above "symptoms" indicates contamination of the filter element.
In the event of such situations, it is necessary, without waiting for the next maintenance, to replace the problematic part.
Choosing a cabin filter for Qashqai
The main difficulty in choosing a cabin filter is that Nissan offers the same product with different part numbers. That is, you can search for original components for any of the following items:
- 27277-EN000;
- 27277-EN025;
- 999M1-VS007.
In addition, filter elements can be presented with other article numbers at official dealers of the Japanese brand. At the same time, all components differ in the same dimensions and characteristics.
Due to the fact that cabin filters for Nissan Qashqai are relatively inexpensive, buying non-original spare parts will not lead to significant savings. However, in some retail outlets, the margin on these components is very high. In such cases, you can refer to the products of the following brands:
- TSN (coal 97.137 and 97.371);
- "Nevsky filter" (NF-6351);
- Filtron (K1255);
- Mann (CU1936);
- Knecht (LA396);
- Delphi (0325 227C).
Bronco, GodWill, Concord and Sat make good quality products. When choosing cabin filters, it should be borne in mind that parts with a carbon layer are cheaper. Standard components will cost 300-800 rubles. The appearance of a layer of soot leads to a rise in the price of such products by half. At the same time, these products provide better purification, removing even small particles from the air. The best products of this type are the filter elements of the brands GodWill and Corteco.
When choosing a suitable product, you should consider for which modification of the Nissan Qashqai the part is purchased. Despite the fact that the same cabin filter is suitable for all generations of the Japanese crossover, an accordion element can be installed on the second generation model. This option is considered more successful, since such products are easier to install.
Self-replacement instructions
Before proceeding with the replacement, you need to find out where the cabin filter is located on the Nissan Qashqai. This component is located under the center console plastic trim on the right side of the driver's seat.
Removal is recommended to start after setting the climate control to the maximum air flow directed to the windshield. This will make the job much easier, as this position means you won't have to support the gear with your finger when removing the gearmotor.
Required tools
To replace the cabin filter with a Nissan Qashqai, you will need a flat and Phillips screwdriver. It is also necessary to stock up on a compact flashlight to illuminate the place of disassembly and dirty laundry, since the procedure is carried out in rather cramped conditions.
For Nissan Qashqai J10
To replace the cabin filter with a Nissan Qashqai J10 (first generation), you will first need to move the driver's seat to the maximum distance, thereby freeing up more space for work. After that, you need to stop and fix the accelerator pedal in this position. Then you can start replacing the cabin filter with the Qashqai J10. The procedure is carried out in several stages:
- Pry off the plastic cover on the side of the center console using a flathead screwdriver. The procedure must be carried out with caution. When working in cold weather, it is recommended to preheat the interior.
- Loosen the heater damper drive fasteners and move this part to the side. When performing this operation, it is recommended to make marks, depending on which components will be installed.
- Remove the damper actuator bracket.
- Remove the cover located to the right of the accelerator pedal with a flathead screwdriver.
- Remove the cabin filter.
To install a new element, the latter must be bent and inserted into place. At this stage, you need to focus on the arrow that is drawn on the body of the product. After that, you need to press the end of the part several times to straighten the filter element. At the end, the removed components are installed in their original places in reverse order.
On the Nissan Qashqai in the back of J11
Replacing the filter with a Nissan Qashqai J11 (2nd generation) is carried out according to a different algorithm. This is due to the fact that this part of the Japanese crossover is located on the right side of the passenger seat, behind the plastic shell. The latter is fixed with a lever, by pulling which the cover can be removed. After removing the housing, access to the filter element is immediately opened. This part must be removed and then a new component installed in its place.
When removing the old cabin filter, it is recommended to support the element so that accumulated dirt does not fall out.
And when installing a new component, care must be taken: in case of damage to the soft layer, the product will have to be changed.
Conclusion
Regardless of the type of modification, cabin filters of the same size are installed on the Nissan Qashqai. The second generation of the Japanese crossover has a more thorough design, so replacing this part with your own hands does not cause any particular difficulties. To perform such work on the first generation Nissan Qashqai, certain skills in car repair will be required.
