Replacing brake discs on Priora
In the event of wear on the front brake discs of the Lada Priora, the braking efficiency of the car is sharply reduced, since the pads can no longer press against the disc with the necessary force. In this case, it is necessary to replace these parts with new ones.
[colorbl style=”blue-bl”]It is worth noting that discs wear out almost always evenly, so they need to be replaced only in pairs, the same goes for pads.[/colorbl]
Removal and installation process
- So, the first step is to rip off the front wheel bolts, then raise the car with a jack and finally unscrew them.
- Then remove the wheel completely.
- Then unscrew the two guide pins using a head 7 and a wrench
- Knock down the brake disc with a hammer or a special puller from the hub
- During installation, it is advisable to apply copper grease to the places of contact between the disc and the hub, thereby reducing vibration and sticking of parts in the future.
For more information on replacing brake discs on a Lada Priora car, you can watch the video clip, which is presented below.
Please note that in the video, the caliper dangles in a suspended state. On the good, it must be fixed so as not to damage the brake hose. In my case, all the parts will go through disassembly, so the hose is of little value.
