Instructions for the Starline i95 immobilizer, functions and modifications
Content
The process of mounting and connecting the device is explained step by step in the instructions for the Starline i95 immobilizer, which is included in the package.
Anti-theft device "Starline i95" has a compact form and a hidden type of installation. The Starline i95 immobilizer with instructions is suitable for most passenger cars and is popular with car owners.
Technical specifications
The Starline i95 immobilizer is designed to prevent hacking, theft or unauthorized seizure of a car.
The maximum owner presence recognition distance is 10 meters. Module supply voltage:
- engine blocking - from 9 to 16 volts;
- electronic key - 3,3 volts.
The current consumption is 5,9 mA when the motor is off and 6,1 mA when the motor is on.
Equipment
The standard immobilizer installation kit includes:
- blocking control module;
- 2 radio tags (electronic keys) made in the form of a key fob;
- installation guide;
- instructions for the immobilizer "Starline i95";
- plastic card with codes;
- sound annunciator;
- buyer's note.
Complete set of the immobilizer "Starline i95"
The device is packed in a branded box confirming the manufacturer's warranty.
The main function
The immobilizer can be used in two modes:
- Checking the presence of an electronic key is carried out once when starting the engine.
- Throughout the journey. The mode is designed to prevent the theft of an already running car.
Blocking the vehicle engine at the start of work makes it possible to use it in conjunction with engine auto-start devices.
Display of the set operating mode of the blocker - on the radio tag and the control unit.
The function of changing the immobilizer action mode using an electronic key:
- Service - temporarily turning off the blocker in case the car is transferred to another person, for example, for repairs.
- Debugging - allows you to reconfigure the release code.
Signal stability control function: the device checks the presence of all immobilizer components in automatic mode. Allows you to calibrate additional components of the blocker.
Starline i95 modifications
The Starline i95 immobilizer is available in three versions:
- main;
- luxury;
- eco.
The instruction for the Starline i95 immobilizer, offered in the kit, is suitable for all modifications.
Comparison of Starline i95 immobilizers
The Starline i95 Eco model is cheaper due to the lack of a hands-free mode.
The "Lux" model provides the ability to adjust the search distance by the control unit of the electronic key. A remote label with a light indicator and a control button is provided here (used to turn off the immobilizer in case of an emergency).
Advantages and disadvantages
Using the Starline i95 immobilizer provides the following benefits:
- The power unit of the car is blocked when trying to steal.
- The presence of the owner of the vehicle is determined by the electronic key. In the absence of a radio tag, the car engine will not start.
- The radio exchange channel between the control unit and the radio sensor is encrypted, and signal interception will not give any result to intruders.
- The device has a motion sensor. If unauthorized persons enter the cabin without a tag, the engine will not be able to be unlocked.
- The RFID tag is enclosed in a sealed housing that protects the electronics of the device from moisture or dust.
- The system provides for the possibility of connecting additional control devices.
Radio tag for immobilizers Starline i95
The device can be reconfigured using a computer.
How to install immobilizer
Before installing the Starline immobilizer, you must:
- Familiarize yourself with the rules of operation.
- Then turn off the power by disconnecting the car battery terminals.
- Turn off all additional electrical equipment of the machine that has an autonomous "Starline i95" power supply.
The process of mounting and connecting the device is explained step by step in the instructions for the Starline i95 immobilizer, which is included in the package.
Power connection
The contact marked GND is connected to the vehicle body.
The supply contact wire marked BAT is either to the battery terminal or to another source that provides constant voltage.
Connecting the Starline i95 immobilizer
When using the Starline i95 model, the wire marked IGN is connected to an electrical circuit that provides a voltage of 12 volts after the engine is started.
Connecting outputs
Contacts Lock and Unlock are used for locking or unlocking the central lock, blocking the hood.
Various command options are provided.
The Input contact is connected to the appropriate limit switch to provide control of door and hood locks. If they are not closed, locking will not occur. Therefore, there must be a negative signal on the wire.
The Output output provides the possibility of using the immobilizer simultaneously with devices for monitoring the presence of a car user in the car.
Connecting outputs
The principle of operation is as follows: if the radio tag gives a response to the signal, then the resistance on the cable will become high. Therefore, the connection must be disconnected. The ground or negative contact is connected when a signal is received from the electronic key.
Sound detector connection
The Output contact must be connected to the negative output of the buzzer, and the positive contact to the BAT wire on the main module.
In the case of connecting an LED to a sound signal, the electrical circuit must be parallel. Additionally, you need to connect a resistor.
Place the beeper in such a way that its sound is clearly audible to the owner. The buzzer should not be located near the main module. This may affect the motion sensor.
Universal channel connection
The options for connecting the EXT contact, in accordance with the instruction manual for the Starline i95 immobilizer, are as follows:
- Plus the brake pedal. It is performed to make a request to the device before blocking the motor, if the anti-theft option is enabled.
- Plus limit switch. Used to control locks. Recommended on machines with 12 volt potential on the device if the locks are unlocked.
- Negative contact of the touch sensor (not included in the standard package). When the Handsfree option is enabled, if the radio tag responds, the lock will be released from the lock only after recognition.
- Negative contact for brake lights. This element is used to notify other road users that the vehicle has stopped before the engine is turned off.
- Negative contact on dimensions. Used to signal the opening and closing of locks.
Universal channel connection
The selected sequence must be strictly observed.
Connection diagrams
The connection diagram is standard for this type of device:
Connection diagram of the immobilizer "Starline i95"
Manual
Key fob and its activation
Radio tag setting algorithm:
- Remove the batteries from the electronic keys.
- Turn on the ignition. Wait for the sound signal to be played by the immobilizer. Switch off the ignition.
- Start the ignition again. When restarting, the immobilizer will beep several times. Track the number of signals corresponding to the first digit of the code indicated on the card attached to the device, then turn off the device.
- Entering subsequent digits of the password on the card is done in a similar way - by turning the ignition on and off when the number of signals corresponding to the next digit of the code is reached. The moment of verification of the combination by the blocker will be indicated by three short signals.
- Turn the ignition off and on again. After 20 seconds there will be 1 long beep. During its playback, you need to turn off the ignition.
- Restart the ignition. Wait for 7 short beeps.
- Press the button on the electronic key and, without releasing it, insert the battery.
- After holding the button for three seconds, a flickering green light on the electronic key should come on.
- Perform the setup procedure with the following key. Each of them (maximum 4 supported) must be programmed in 1 cycle.
- Remove the battery from the key and insert again.
- Switch off the ignition.
If there are problems with the setting, the red light will be on the electronic key.
Alerts and indication
Light and sound signals. Table:
Types of light and sound signals
According to the instruction manual for the Starline i95 immobilizer, various types of light and sound signals are provided.
Door lock control
When the Hands Free option is activated, the car doors will open in the following cases:
- radio tag hits within the programmed distance;
- turning off the ignition when pre-setting this option;
- when entering the emergency deactivation code of the blocker;
- when entering the service rules.
Moving the radio tag beyond the set distance will automatically lock the doors. When the car starts moving, the locks open.
The door opening impulse is given in the EXT channel in the following cases:
- when the touch sensor is triggered (the presence of an electronic key);
- turning off the ignition when pre-setting this option;
- entering the correct emergency unlock code;
- transfer to the service regulations.
Door lock control
When using the spare EXT channel, the doors are closed as a result of a three-second impact on the presence sensor - if there is a radio tag in the communication zone.
Hood lock control
The hood closes automatically when the signal from the electronic key fails.
The lock opens in the following cases:
- when the ignition is turned on and the radio tag is present;
- emergency unlocking of the device;
- if the electronic key falls within the limits of recognition by the control module.
The same actions occur with the engine lock warning signal.
Service Mode
The instructions for entering the Starline i95 immobilizer into the service mode are as follows:
- Press the button on the radio tag and do not release it. At this time, the Starline immobilizer checks the current control procedure and establishes a relationship.
- Successful entry into the service mode will be indicated by yellow blinking.
- Hold the button for a couple more seconds and release.
The entry into the service schedule of the power unit blocker will be indicated by a single flicker of the LED light.
Display module programming
The display module is activated as follows:
- Connect the power cable to the device. When connected, the connection is checked automatically.
- 10 seconds after the end of the link test, the LED starts blinking.
- Press the display unit button for three seconds.
- To complete the binding of the immobilizer display module, turn off the ignition.
When the binding is completed normally, the LED will turn green, and if the binding does not occur, it will turn red.
