How to make a cool tuning "Lada Priora" with your own hands
Tips for motorists

How to make a cool tuning "Lada Priora" with your own hands

The first Lada Priora rolled off the assembly line in 2007. After a couple of years, this car became very popular with domestic motorists, mainly because of its affordable price. At the same time, many car owners strive to give their Priora individuality. Make it look more solid and more expensive. Tuning helps them with this. Let's see what the procedure is.

Engine change

The Priory engine provides ample opportunities for tuning. Most often, motorists bore the cylinder block and put shortened pistons in the engine. Such pistons, in turn, require the replacement of the crankshaft. As a result, the characteristics of the engine are completely changed, and its power can increase by 35%. But there is a downside: fuel consumption will also increase. Therefore, not all motorists decide on such a radical tuning of the motor. Many are limited to installing mechanical compressors in the motor that can increase engine power by 10-15%.

How to make a cool tuning "Lada Priora" with your own hands
Cylinder boring is one of the most time-consuming engine tuning options.

Another inexpensive way to increase the dynamic parameters of the Priora is to work with a carburetor. In this device, jets and an acceleration pump are changed (most often, parts manufactured by BOSCH are installed in place of standard spare parts). The fuel level is then finely adjusted. As a result, the car picks up speed twice as fast.

Chassis

When it comes to changes in the chassis, the first thing drivers do is remove the regular brake booster, and put a vacuum one in its place, always with two membranes. This doubles the reliability of the brakes. Stiffer springs and ceramic-coated discs are installed in the clutch basket, and a lightweight flywheel is placed on the crankshaft. This measure significantly reduces the acceleration time of the car without premature wear of the clutch and gearbox.

How to make a cool tuning "Lada Priora" with your own hands
On the rear wheels of the "Priors" often put disc brakes from the "tens"

Finally, the rear drum brakes are removed from the Priora and replaced with disc brakes from the VAZ 2110. The drum brake design is almost never used anywhere, since it is considered obsolete. Installing a disc system on the rear wheels improves braking reliability and requires almost no modification.

Improve Appearance

Here's what drivers are doing to improve the look of the Priora:

  • new bumpers are installed on the car (sometimes complete with thresholds). You can buy all this in specialized stores. Most often, Priora buys lightweight kits from the Sniper or I'm a Robot series. They are made of plastic, the cost of one bumper starts from 4500 rubles;
  • spoiler installation. The products of the company AVR, which produces fiberglass spoilers, are very popular. Or a spoiler can be made to order in a tuning studio. But this is a very expensive pleasure;
  • disk replacement. On the early Priora models, the discs were steel, and their appearance left much to be desired. Therefore, tuning enthusiasts are trying to replace them with cast ones, since they are more beautiful and lighter. But for all its attractiveness, a cast disc, unlike a steel one, is very fragile. And its maintainability tends to zero;
  • replacement or modification of mirrors. The most inexpensive option is to install special overlays purchased at the store on regular mirrors. This simple procedure radically changes the look of the side mirrors. The second option is to install mirrors from other cars. Now that AvtoVAZ has updated its lineup, Priors are often equipped with mirrors from Grants or Vesta. But before installation, they will have to be finalized, since they are attached to the body in different ways;
  • replacing door handles. Regular handles on the "Prior" are trimmed with ordinary plastic, usually black. Yes, they look very old fashioned. Therefore, tuning enthusiasts often replace them with chrome-plated handles, "drowned" in the car body. As an option, the handles can be finished in carbon look, or completely match the color of the car body. There is no shortage of door handles today. And on the counter of any spare parts store, a car enthusiast will always be able to choose the option that suits him.

Tuning of salon

Here are the typical tuning options for the Priora salon:

  • upholstery change. The regular upholstery on the "Prior" is an ordinary leather substitute with plastic fragments. This option does not suit everyone, and drivers often remove almost all plastic inserts, replacing them with leatherette. Sometimes carpet is used as an upholstery material, although such upholstery does not differ in durability. Salons are rarely trimmed with natural leather, since this pleasure is not cheap. Such a finish may well cost half the cost of the car;
    How to make a cool tuning "Lada Priora" with your own hands
    Upholstery in this salon is used carpet with plastic inserts of the same color
  • steering wheel cover replacement. In any tuning shop, the driver can pick up a steering braid to taste, from almost any material - from leatherette to genuine leather. There is no need to make this finishing element yourself;
  • dashboard trim. The most popular option is vinyl wrap. Cheap and angry. Although the service life of even a very good film does not exceed six years. Much less often, the dashboard is trimmed with carbon fiber. To apply such a coating will require a specialist with the appropriate equipment. And his services will cost the driver a pretty penny;
  • interior lighting. In the standard version, only the driver and front passenger have lampshades. But even this lighting is not bright. To somehow correct this situation, drivers often install lights for the legs and the glove compartment. It is carried out using ordinary LED strips, the cost of which starts from 500 rubles. Some car enthusiasts go even further and install floor lighting. It can be useful if you urgently need to find some fallen thing in the dark.
    How to make a cool tuning "Lada Priora" with your own hands
    Floor lighting is especially useful when the driver drops something in the dark.

Video: we paint the Priory salon black

Fierce BLACK SALON for 1500 rubles. on prior. Priora black edition.

Lighting system

First of all, the headlights are modified:

trunk

In the trunk, many people prefer to install speakers complete with a subwoofer. This is done with both sedans and hatchbacks. And this is the most preferred option for lovers of powerful sound. There is only one problem: it will be impossible to use the trunk for its intended purpose. It simply won't have room.

Not everyone is ready to make such sacrifices. Therefore, instead of powerful audio systems, LED lighting made from the tapes mentioned above is often put in the trunk. This is a very common phenomenon, because the standard trunk and rear shelf lights have never been bright.

Photo gallery: tuned "Priors"

So, the car owner is quite capable of changing the look of the Priora and making the car more beautiful. This rule is true for both sedans and hatchbacks. The main thing in this business is a sense of proportion. Without it, the car can turn into a misunderstanding on wheels.

Add a comment